Audio Setup
Digital Audio Output
The digital audio output jack (labeled "Coaxial") is
used to output the audio signal recorded on DVD
discs to an external amplifi er/receiver. The player
provides three options for this audio signal:
•
SPDIF/PCM - Select if the player is connected to
a 2-channel digital amplifi er.
•
SPDIF/RAW - Select if the player is connected to
a Dolby Digital 5.1 capable amplifi er.
•
Off - Select if you are not using the Coaxial audio
output.
1
Press SETUP in Stop mode.
2
Press
to select "Audio Setup", then
press
.
3
Press
to select "Digital Out", then press
4
Press
to select your preferred Digital Out
setting.
Audio Setup
Digital Out
5
Press ENTER.
.
SPDIF/PCM
SPDIF/RA
R W
RA
A
AW
Of
Off
Off
18
WARNING:
• Do not set "Digital Out" to "SPDIF/RAW"
unless you are connecting the player to an
A/V amplifi er/receiver with Dolby Digital (AC-3)
decoding capability.
• High volume sound may damage your hearing
as well as the speakers.
To exit the Setup menu
Press SETUP or select "Exit Setup" on the Setup
Menu screen.