Screen Setup
Video Output
If you connected the DVD player to your TV using
the S-Video or Component Video output, you must
specify in the menu system which of these connection
types you are using.
•
Before you select P-SCAN, make sure your TV
supports Progressive Scan and that the Y, Pb, and
Pr cables are properly connected.
•
If your screen is distorted after adjusting this
setting, press the P.SCAN button on the remote
control to switch back to Interlace mode.
1
Press SETUP.
2
Press
to select "Screen Setup", then
press
.
3
Press
to select "Video Output", then
press
.
4
Press
to select the appropriate Video
Output setting for your television.
Screen Setup
TV Ty Ty T pe
Screen Saver
TV System
Video Output
Brightness
Contrast
• S-Video - Choose when using a standard
Composite Video or S-Video connection to
your TV. Note: Progressive Scan will NOT work
when this setting is selected.
• S+Component - Choose when using a
standard Composite Video or Component
Video connection to your TV.
• P-SCAN - Choose when using a Progressive
Scan connection to your TV.
5
Press ENTER.
• If you selected P-SCAN, you will be prompted
to confi rm that your TV supports Progressive
Scan. Press PLAY
to cancel.
To exit the Setup menu
Press SETUP or select "Exit Setup" on the Setup
Menu screen.
S-Video
S+Component
P-SCAN
to continue, or STOP
Brightness
You can change the light intensity of DVD playback to
"Normal", "Bright", or "Soft".
1
Press SETUP.
2
Press
press
.
3
Press
4
Press
setting.
Screen Setup
TV Ty
Screen Saver
TV System
Video Output
Brightness
Contrast
5
Press ENTER.
To exit the Setup menu
Press SETUP or select "Exit Setup" on the Setup
Menu screen.
Contrast
You can increase or decrease the difference between
light and dark tones during DVD playback.
1
Press SETUP.
2
Press
press
.
3
Press
4
Press
from -4 (least contrast, may lose detail in dark
scenes) to +4 (most contrast, may lose detail in
well-lit scenes).
Screen Setup
5
Press ENTER.
To exit the Setup menu
Press SETUP or select "Exit Setup" on the Setup
Menu screen.
17
to select "Screen Setup", then
to select "Brightness", then press
to select the desired Brightness
Normal
T pe
Ty
Bright
Soft
to select "Screen Setup", then
to select "Contrast", then press
to select the desired Contrast setting
TV Ty Ty T pe
-3
Screen Saver
-2
TV System
-1
Video Output
0
Brightness
+1
Contrast
+2
+3
.
.