Dvd Playback; Before You Begin; Basic Dvd Playback; Stop - GoVideo D645 User Manual

DVD Playback

DVD Playback

Before You Begin...

• Turn on your TV and select the appropriate video
input.
• If you connected the player to your audio system,
turn on your stereo or audio system and select the
appropriate audio input.

Basic DVD Playback

1
Press POWER on.
2
Press OPEN/CLOSE to open the disc tray.
3
Hold the edge of the disc and place it in the tray
with the label side up.
4
Press OPEN/CLOSE again to close the disc tray.
• The DVD player starts playback or opens the
DVD disc menu automatically.
• Proceed with steps 5 and 6 if a menu is
available on the disc.
5

Press or use the number button(s) to
select the desired chapter/title.
• To select a chapter/title, input the number; e.g.,
press "1" for chapter 1, "1-0" for chapter 10,
etc.
6

Press PLAY .
• The player starts playback of the selected item.

Stop


• Press STOP once to stop and hold playback at
the current position.

• Press STOP twice to stop and reset the disc to
the beginning.

Pause


Press PAUSE once during playback.
• The screen is paused.
• To return to normal playback, press PLAY

Forward/Reverse Scan

 
Press REW or FF
• Normal playback is resumed when you press

PLAY .

• The Forward Scan (

Reverse Scan ( x2,
changes each time you press the REW
buttons.

during playback.

x2, x4, etc.) and

x4, and etc.) speed

/FF

Skip Next/Previous

You can skip to a specifi c chapter or track during
playback.
Skipping Ahead

Press NEXT
• Skips a chapter each time you press the NEXT
button.
Skipping Back

Press PREV
If you press the PREV
•
a chapter, the DVD player returns to the beginning
of the chapter. The player then skips a chapter
each time you press the PREV

Repeat

Press REPEAT during playback to select from the
following options:
• Press once to repeat the current Chapter
• Press twice to repeat the current Title
• Press three times to repeat the current Disc
• Press four times to turn repeat Off
To return to normal playback
Press REPEAT until "REPEAT Off" appears.
• Repeat playback works only with discs for which
the elapsed playing time appears on the player's
display during playback.
• Repeat playback may not work correctly with
some DVDs.
When not in use...
When the DVD player is not in use, remove the disc
and press POWER to turn off the player.
• The disc continues to rotate while the menu
is displayed even after the player has fi nished
playing a particular disc. When no further
.
selections are to be played, be sure to press the

STOP button to clear the menu screen.
• If the disc is placed in the tray upside down (and
it is a single sided disc), the "NO DISC" message
will appear.
For your reference:
• If " " appears when a button is pressed, it
means that the corresponding function is not

available. The function may not be present on the
disc, or the player may need to be in Stop mode
to access the function.
10
during playback.
during playback.

button midway through

button.
