Table of Contents
Advertisement
:: Digital Audio Setup
The Digital audio menu allows you to set the format of the audio sig-
nal from the coaxial and optical digital audio outputs. For example, if
you connected the DVD player to an external amplifier with a Dolby
Digital decoder, you should set Dolby Digital and DTS settings to Bit-
stream.
1 From Stop mode, press SETUP.
2 Select Digital and press ENTER.
Digital Audio
Setup Menus
3 Use the
/
keys to select each of the following:
Dolby Digital Setting
Sets the digital audio format of outgoing Dolby Digital 5.1 signals:
•
Select Dolby D, and then use the / keys to select:
Bitstream
Outputs the raw 5.1 channel digital bitstream from the optical/
coaxial digital audio outputs; e.g., to an external amplifier with a
Dolby Digital decoder.
PCM
(Default) Outputs 2-channel digital audio from the optical/coaxial
digital audio outputs.
44
Off
Disables Dolby Digital output.
DTS Setting
Sets the digital audio format of outgoing DTS (Digital Theater Sound)
signals:
•
Select DTS, and then use the / keys to select:
Bitstream
Outputs the raw 5.1 channel digital bitstream from the optical/
coaxial digital audio outputs; e.g., to an external amplifier with a
DTS decoder.
PCM
(Default) Outputs 2-channel digital audio from the optical/coaxial
digital audio outputs.
Off
Disables DTS output.
MP3 Setting
Sets the outgoing digital audio format of MP3 tracks:
•
Select MP3, and then use the / keys to select:
Bitstream
Outputs the raw MP3 digital bitstream from the optical/coaxial
digital audio outputs.
PCM
(Default) Outputs 2-channel digital audio from the optical/coaxial
digital audio outputs.
Off
Disables MP3 output.
CD Setting
Sets the outgoing digital audio format of CD tracks:
•
Select CD, and then use the / keys to select:
Advertisement
Table of Contents
Troubleshooting
