Using Bluetooth Device; Registering A Bluetooth Device - JVC KW-NT500HDT Instructions Manual

Using Bluetooth device

Registering a Bluetooth device

To connect a Bluetooth device for the
first time
When you connect a Bluetooth device to the unit
for the first time, make pairing between the unit
and the device. Pairing allows Bluetooth devices to
communicate with each other.
• Once you register a Bluetooth device, the device
remains registered until the registration is deleted.
(☞ page 80)
• Up to 5 devices can be registered in total.
• Only one device for Bluetooth phone and one for
Bluetooth audio can be connected at a time.
• To use the Bluetooth function, you need to turn on
Bluetooth function of the device.
The sample screen shown here depicts the KW-NT500HDT.
When using the KW-NT300, the Device Name displayed is
"KW-NT300".
1
Operate the Bluetooth device to turn on its
Bluetooth function.
2
Display the Bluetooth setting screen.
For connecting a Bluetooth mobile phone
<Phone Settings> is displayed.
EN_KW-NT500HDT_NT300[J].indb 97 EN_KW-NT500HDT_NT300[J].indb 97
For connecting a Bluetooth audio player
• To activate "BT Audio" for source selection, ☞
page 75 (<Bluetooth Audio>).
<Mode> is displayed.
3
Change the PIN code.
• If you skip changing PIN code, go to step 4.
PIN code (initial: 0000)
Press: Deletes last character
Hold: Deletes all characters
4
97
Continued on the next page
12/7/2011 1:06:36 PM 12/7/2011 1:06:36 PM