How To Forcibly Eject A Disc - JVC KW-NT500HDT Instructions Manual

Hide thumbs Also See for KW-NT500HDT:
Table of Contents

Advertisement

For safety...
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
Temperature inside the car...
If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.
When replacing/rotating the tires:
It is required to clear all the accumulated calibration
data which is important for accurate navigation. To
clear the data, ☞ page xx.
How to read this manual:
• Illustrations of KW-NT500HDT are mainly used for explanation.
• < > indicates the variable screens/menus/operations/settings that appear on the touch panel.
• [ ] indicates the buttons on the touch panel.
EN_KW-NT500HDT_NT300[J].indb 5
EN_KW-NT500HDT_NT300[J].indb 5

How to forcibly eject a disc

• Unlike the standard disc-eject function, when you
forcibly eject a disc, the disc does not automatically
load again after 15 seconds if it is not removed. Make
sure you remove the disc so that it does not fall.
5
[Hold]
12/7/2011 1:05:57 PM
12/7/2011 1:05:57 PM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kw-nt300

Table of Contents