Table of Contents
Advertisement
Oven vents Location
The ovens are vented above the doors. When the
oven is on, warm air flows through the vents. This
venting is necessary for proper air circulation in the
oven and good baking results. Steam or moisture
may appear near the vents, this is normal. Do not
block the oven vents.
Oven Vent
Oven Vent
Setting for Best Results
Lower oven rack supports
Installing Oven Rack Supports
Always install oven rack support before turning
on the oven (when the oven is cool).
To aid installation of the porcelain oven rack
supports, apply a thin layer of cooking oil to all the
prongs of the supports shown below.
To install oven rack supports:
1. Hold the oven rack support at a slight angle
and insert prongs into the holes at the top of
the oven cavity (Arrow 1).
2. Lift the rack into the top holes, aligning the
bottom prongs with the bottom holes (Arrow 2).
3. Once the upper prongs are in place, hold the
oven rack support flush with the oven side and
insert the bottom prongs into the bottom holes
(Arrow 3).
4. Slide the bottom prongs down into the lower
holes. Some force may be required to set the
rack into place (Arrow 4).
To remove the ladder rack support for a self-clean
cycle, reverse the order used when installing the
ladder rack supports.
19
Advertisement
Table of Contents
