Reversing The Door Swing - Sandstrom SWC59B15E Instruction Manual

INSTALLATION

Reversing the Door Swing

Tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner.
GB
• Ensure the unit is unplugged and empty.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
1. Remove the 2 screws at the back of the top
cover.
2. Lift the rear end of top cover, and push it a bit
forward to release it from studs. Move the door
hinge cover to the opposite side. Place it on a
padded surface to prevent from scratching.
3. Unscrew and remove the top hinge. Lift the
door and place it on a padded surface to
prevent from scratching.
16