Gigabyte SB93 Quick Start Manual page 14

HDD / 硬碟機
Note: If the first pin of the red cable doesn't align to Pin 1 labeled on the
hard disk and option devices, your hard disk and option devices will not
work and may cause damage to the disk.
注意：若您未將排線上有紅色標示的第一腳對齊硬碟及選購光碟機上標示為 1 的腳
位，您的硬碟及選購光碟機將無法啟動且可能導致損壞。
B. For Model VB3 / VB3 機種：
Take out the IDE bus cables bundled in the accessory kit. Connect the black
connector to the hard disk drive and floppy disk drive / option devices, and align the
first pin of the red cable to Pin 1 labeled on the hard disk and floppy disk / option
devices.
取出附件盒內的 IDE 匯流排連接線，將黑色連接頭接於硬碟及軟碟機/選購光碟機上，並將排線
上有紅色標示的第一腳對齊硬碟及軟碟機/選購光碟機上標示為 1 的腳位。
HDD / 硬碟機
Note: If the first pin of the red cable doesn't align to Pin 1 labeled on the
hard disk and floppy disk drive / option devices, your hard disk and floppy
disk drive / option devices will not work and may cause damage to the disk.
注意：若您未將排線上有紅色標示的第一腳對齊硬碟及軟碟機/選購光碟機上標示為 1
的腳位，您的硬碟及軟碟機/選購光碟機將無法啟動且可能導致損壞。
ODD / 選購光碟機
ODD / 選購光碟機
FDD / 軟碟機