During A Conversation - Panasonic KX-HDV130X Operating Instructions Manual

During a Conversation

During a Conversation
Transferring a Call (Call Transfer)
You can transfer a call to another destination (extension or outside party).
To transfer
1. Press / /[TRANSFER] during a conversation.
2. Dial the party you want to transfer to. a
3. Wait until the other party answers to announce the transfer.
4. Go on-hook.
Note
R To return to the call before the transfer destination answers, press
To do a blind transfer
*1
1. Press during a conversation.
Blind
2. Dial the party you want to transfer to. a
*1 If blind transfers are not permitted, this soft key is not displayed. Contact your administrator for
further information.
Holding a Call
You can put a call on hold by holding the call at your extension.
Holding
To hold the current call
1. / /[HOLD/MESSAGE]
Note
R When a program key is assigned as a Line key, if you press a Line key other than the one for the
current call, the call is put on hold or is disconnected depending on the Automatic Call Hold settings.
For details, contact your phone system dealer/service provider.
To retrieve a call on hold at your line
1. / /[HOLD/MESSAGE]
*1 When the handset is already off-hook, press and release the hook switch.
Note
R When a call is received while another call is on hold, pressing and releasing the hook switch will
answer the call.
R You can also retrieve a call on hold by following the step below.
1. Press the corresponding
Holding in a System Parking Zone (Call Park)
You can use this feature as a transferring feature.
When Call Park is permitted, the
must be set beforehand. Also, depending on your phone system, you may need to enter a parking zone
32
Call
Call
*1
/[LINE] key. a
OK
soft key is displayed. However, the Call Park feature number
Park
/[CANCEL].