Quick Links

Safety Information
Read the operating instructions for the unit and all other com-
ponents of your car audio system carefully before using the
system. They contain instructions about how to use the sys-
tem in a safe and effective manner. Panasonic assumes no
responsibility for any problems resulting from failure to
observe the instructions given in this manual.
This pictograph intends to alert you to the pres-
ence of important operating instructions and
installation instructions. Failure to heed the
instructions may result in severe injury or
Observe the following warnings when using
this unit.
Comply with regulations
Always comply with legal requirements and local restrictions
when using this unit.
Keep away from the medical devices.
This unit and mobile phones can interfere with the function-
This manual uses pictographs to show you how to use the
product safely and to alert you to potential dangers resulting
from improper connections and operations. The meanings of
the pictographs are explained below. It is important that you
fully understand the meanings of the pictographs in order to
use this manual and the system properly.
This pictograph intends to alert you to the pres-
ence of important operating instructions and
installation instructions. Failure to heed the
instructions may result in injury or material dam-
ing of medical devices such as hearing aids or pacemakers.
Failure to observe this may arise the malfunction of med-
ical devices resulting in personal injury or death.
The driver should not neither adjust the unit nor
make a pair while driving.
Adjusting the unit or making a pair of this unit and the mobile
phone will distract the driver from looking ahead of the car and
can cause accidents. Always stop the car in a safe location and
use the parking brake before adjustment or making a pair.
Use the proper power supply (12 V).
This product is designed for operation with a negative
grounded 12 V DC battery system. Never operate this prod-
uct with other battery systems, especially a 24 V DC battery
Do not disassemble or modify the unit.
Do not disassemble, modify the unit or attempt to repair the
product yourself. If the product needs to be repaired, consult
your dealer or an authorized Panasonic Servicenter.
Do not use the unit when it is out of order.
If the unit is out of order (no power, no sound) or in an
abnormal state (has foreign objects in it, is exposed to
water, is smoking, or smells), turn it off immediately and
consult your dealer.
Stop using this unit and mobile phone whenever
This unit shares the communication frequency with other
private or public wireless communication equipment such as
a wireless LAN and other wireless communication radios.
You should stop using this unit whenever you are notified
that your unit disturbs other wireless communication imme-
Observe the following warnings when
installing. (including whole assembly of the
devices for system up)
Disconnect the lead from the negative (–) battery
terminal before installation.
Wiring and installation with the negative (–) battery terminal
connected may cause electrical shock and injury due to a
short circuit.
Some cars equipped with the electrical safety system have
specific procedures of battery terminal disconnection.
Never use safety-related components for installa-
tion, grounding, and other such functions.
Do not use safety-related vehicle components (fuel tank,
brake, suspension, steering wheel, pedals, airbag, etc.) for
wiring or fixing the product or its accessories.
Installing the product on the air bag cover or in a
location where it interferes with airbag operation is


Table of Contents

Summary of Contents for Panasonic 932CY-BT100U

  • Page 1 They contain instructions about how to use the sys- from improper connections and operations. The meanings of tem in a safe and effective manner. Panasonic assumes no the pictographs are explained below. It is important that you Use the proper power supply (12 V).
  • Page 2: Safety Information

    For maximum safety, have it installed by your dealer. This unit is designed for use exclusively in automo- Panasonic is not liable for any problems resulting from your Never install the product in a location where it inter- own installation of the unit.
  • Page 3 Safety Information (continued) The following applies only in the U.S.A. NOTICE Caution This equipment has been tasted and found to comply with Part 15 of the FCC Rules Do not install the product where it is exposed to the limits for a Class B digital device, pursuant to part 15 strong vibrations or is unstable.
  • Page 4: Customer Services Directory

    Link : “Servicentres locator” under “Customer support” Accessory Purchases: Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at: or, send your request by E-mail to: You may also contact us directly at: 1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday-Friday 9 am to 8 pm, EST.)
  • Page 5: Limited Warranty

    DIVISION OF PANASONIC PUERTO RICO, INC. CARRY-IN OR MAIL-IN SERVICE Panasonic Canada Inc. warrants this product to be free from defects in materi- Ave. 65 de infanteria, Km. 9.5, San Gabriel Industrial Park For Carry-In or Mail-In Service in the United States, call 1-800-211-PANA...
  • Page 6: Table Of Contents

    Components Contents Safety Information ......2 Customer Services Directory ..8 Operating Instructions System-up connecting cable (3 m) (YFM284C529ZA) (YEAJ011812) Limited Warranty ......10 Q'ty: 1 Q'ty: 1 Components ........12 Owners Information Card Double-sided Tape Contents .......... 13 (YFX994C128ZA) Q'ty: 1 Q'ty: 2 Introduction ........
  • Page 7: Introduction

    Introduction Panasonic welcomes you to our constantly growing family of electronic products owners. Installation sample We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their work has built for our company. We...
  • Page 8: Glossary

    Glossary Names of Controls and Functions Bluetooth Link key ® The Bluetooth word mark and logo are owned by the Bluetooth This is an up to 16-byte password used for device identification. SIG, Inc. and any use of such marks by Matsushita Electric Entering the same PIN number of the device to be connected Main unit Microphone with Bracket...
  • Page 9: Preparation

    Wait until the indicator lights continuously (for approximately Press and hold the [Hang-on] until the indicator blinks (Refer to the description regarding 20–30 seconds). Retry from Step 2 when the indicator does not slowly (for approximately 2 seconds). Volume adjustment Car Audio/AV.)
  • Page 10: Basic Operation

    Basic Operation Advanced Operation Note: Calling back Rejection of incoming calls Caution Bluetooth connection will make the battery life of mobile ¡ A call-back call can be made. phone shorter. ¡ Telephone conversation during driving may result in conse- However, the callback function is disabled after disconnecting Press the [Hang-up] to reject an incoming call.
  • Page 11: Installation

    Installation q Attach the Main unit q and the Switch Unit w with the Installation Hardware Warning Caution double-sided tape t y. ¡ This installation information is designed for professional ¡ Make sure that wiring is completed before installation. Switch Unit w Main Unit q Main Unit installers with knowledge of automobile electrical safety sys-...
  • Page 12: Wiring

    Wiring Connection between the Hands-Free Kit featuring Bluetooth ® technology and head unit Connection among the Hands-Free Kit featuring Bluetooth ® technology and two or more devices Microphone with Bracket e Main Unit q Head unit (e.g. CQ-C8403U, Option) Head unit/Expansion module Switch Unit w connection cable (supplied with CY-EM100U)
  • Page 13: Troubleshooting

    The mobile phone (or main unit) is touched or covered by metal objects. Or the mobile consult your dealer. repair to professionals. Panasonic shall not be liable for any phone is hidden or far from the main unit. ¡ Never try to repair the unit by yourself because it is dan-...
  • Page 14 Troubleshooting (continued) Problem Possible cause Possible solution Problem Possible cause Possible solution There is another wireless device near the unit. The head unit is set to OFF. Switch off the wireless device or keep it away from these bluetooth units. Turn on the power of the head unit.
  • Page 15 Troubleshooting (continued) Problem Possible cause Possible solution Problem Possible cause Possible solution The Switch Unit is disconnected. Distance between the microphone and the talker is too long or the connection of micro- Connect the Switch Unit securely and properly. phone is not proper. Talking volume is low The Hands-Free Kit Make the microphone closer to the talker.
  • Page 16: Specifications

    Specifications Power supply : DC 12 V(11 – 16 V), test voltage 14.4 V, negative ground Note: (Supplied from a head unit or a ¡ Specifications and design are subject to modification without notice due to improvements. Expansion Module) Current consumption : Less than 1.0 A ¡...

Table of Contents