Summary of Contents for Middle Atlantic Products BRK Series
Page 1
(DCFANKIT-4) REAR ACCESS PANEL (RK-RAPx) THANK YOU Thank you for purchasing the MBRK/BRK Series 22" and 28" Deep Laminate Rack. Please read these instructions thoroughly before assembling this product. PRODUCT FEATURES - Sturdy design - Easy to assemble - Multiple options are available for different configurations...
TOOLS REQUIRED #2 Phillips screwdriver PARTS SIDE TOP/BOTTOM (INTERCHANGEABLE) (INTERCHANGEABLE) NOTE: 2 Space Rails can be installed anywhere on side panels at rear of rack to 2 Space Rackrail provide a location to mount Bolt cable management products (22" deep, Qty 16) such as Lacer Bars Model # (28"deep, Qty 20) LBP-xx (See Page 9).
Page 3
ASSEMBLY NOTE: It is recommended that installation of rackrail and other options be completed after rack is assembled. 1) Using a screwdriver, install bolts to TOP/BOTTOM PANEL top/bottom panels as shown. (See FIGURE A) NOTE: Do not overtighten. BOLT FIGURE A 2) Install 1/2 turn fasteners to sides as shown.
Page 4
ASSEMBLY (Continued) 3) For ease of assembly, install one side panel and one top/bottom panel as shown. (See FIGURE C) Turn 1/2 turn fasteners clockwise to tighten. NOTE: Do not overtighten. NOTE: Labels on side panels indicate bottom of panels. Ensure side panel labels face in the same direction.
Page 5
ASSEMBLY (Continued) 5) Stand rack upright and install corner braces (4 places) into pre-drilled holes as shown (See FIGURE E) using the 8 x 3/4" wood screws provided. WARNING: Corner Braces must be used on 16 space and up racks CORNER BRACE FIGURE E #8 x 3/4 WOOD SCREW...
Page 6
DETERMINE YOUR OPTIONS BEFORE INSTALLING RACKRAILS. 1 2 3 3 2 1 If Door (RK-GDxx) and Rear Access Panel (RK-RAPx) are not being used. Front and rear rackrail can be installed in any one of 3 positions. (See FIGURE F) Determine location by preference and equipment being installed.
Page 7
ASSEMBLY (Continued) 6) Install rackrail as shown (See FIGURE G) using the 8 x 3/4" wood screws provided. NOTE: Use all pre-drilled holes provided. (Quantity of pre-drilled holes varies with rack height) FRONT #8 x 3/4" WOOD SCREW FIGURE G REAR #8 x 3/4"...
Page 8
OPTIONS 1) Rear Access Panel (RK-RAPx) for equipment protection, thermal and cable management. Top Panel Cable Management Bottom Panel Rear Access Panel 2) Fan Kit (DCFANKIT-4) provides optimum thermal management. (Use of Rear Access Panel required) Fan Panel In Line Thermostatic Controller Cable Tie Mount Power Supply 3) Smoked tempered glass door (RK-GDxx) secures components and enhances appearance.
OPTIONS (Continued) 4) Heavy Duty Casters (RKW-HD) for 22" and 28" deep racks. Locking Casters Non-Locking Casters TIP: Using the 2 Space Rackrail and screws provided, you can mount any of our horizontal lacer bars (optional) behind a component (for example) to facilitate cable management, providing for a neater and easier installation to service.
WARRANTY Middle Atlantic Products (the "Company") warrants the MBRK/BRK Series 22” and 28” Deep Laminate Rack to be free from defects in material or workmanship under normal use and conditions for a period of (7) seven years from date of shipment by the Company.