Ac Adapter (Main Unit); Change Settings; Tilt The Display; Remote Sensor - Oregon Scientific BAR998HGN Manual

AC ADAPTER (MAIN UNIT)

The AC power adapter socket is located at the bottom of
the main unit. Batteries are for back-up purposes only;
the adapter is required for Voice Recognition.
shows in the Weather Forecast Area when AC
adapter is not plugged in.

CHANGE SETTINGS

1. Press SELECT to
switch between
Areas. indicates
the selected Area.
2. Most Areas have alternate display options (for
example, Clock / Alarm or Barometer / UVI).
Press MODE to switch options, or ALARM to switch
between Clock and Alarm.
3. Press and hold MODE for 2 seconds to enter setting
mode.
4. Press UP or DOWN to change settings.
5. Press MODE to confirm.

TILT THE DISPLAY

You can tilt the display
back for better viewing or
audio sound. Hold the base
of the unit with your hand,
and then gently push the
top back.

REMOTE SENSOR

This product is shipped with the RTGR328N Thermo/Hygro
Sensor and an optional UVR138 Ultraviolet Sun Ray
Sensor. The main unit can collect data from up to 6 sensors
(5 Thermo / Hygro Sensors and 1 UV Sensor). (Additional
sensors sold separately.)
The RTGR328N Sensor collects temperature and humidity
readings, and signals from official time-keeping
organizations for the radio-controlled clock.
For information about the UVR138, refer to the UVR138
User Manual.
6