Table of Contents
Advertisement
VOICE RECOGNITION
This product has a built-in sensor for recognizing voice
commands. When activated, the product can tell you the
current time, alarm, and weather conditions in response
to a voice command that you give it.
The language for the Voice Recognition feature is selected
when you set the clock (
ACTIVATE VOICE RECOGNITION PROMPT
Plug in the AC power adapter (it must be plugged in for
the feature to work). Press SELECT to navigate to the
Clock Area. Then, simultaneously press and hold UP and
DOWN for 3 seconds. A welcome message in the selected
language will broadcast.
SET VOLUME LEVEL
There are 3 volume levels: Low, Medium and High. To set
the volume level, first activate Voice Recognition.
(
will display. ) Then, access the Clock Settings
Mode to select the volume level (
9).
displays
when Voice
Recognition is ON
10, Step 5).
VOICE RECOGNITION COMMANDS
The product responds to the following voice commands:
COMMAND
WEATHER STATION
ALARM
TIME
WEATHER
TIPS FOR USING VOICE RECOGNITION
Face the product, no more than 2 meters (6 feet) away.
Speak slowly and distinctly. Minimize background noises,
such as the television or other people talking. If the weather
station does not recognize your command, it will ask you
to repeat it. After 2 unsuccessful attempts you will hear a
beep. To begin again, say "Weather Station" to re-enter
the program, then repeat the command.
The product will not respond to any command when it is
talking. Say command only when it has finished.
16
RESPONSE
Prepares to access
weather station data.
Further command is
needed.
Alarm status (on or off)
and setting
Current time
Weather forecast,
current temperature
and humidity for
selected sensor.
Advertisement
Table of Contents
