Iiyama ProLite T1532MSC-B1AG User Manual page 21

Press the Button. (AUTO ADJUST)
Adjust the image manually by following procedure below when the screen has a fl icker or
blur, or the picture does not fi t in the display area after performing the Auto Adjust.
Adjust the V-POSITION so that the top and bottom of the picture frame will fit to the
display area.
1) Adjust the H-POSITION so that the left side of the picture frame will move to the left
edge of the display area.
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the H-SIZE.
NOTE
 When the left side of the picture frame moves apart from the left edge of the display
area during the H-SIZE adjustment, adjust steps 1) and 2).
 Another way to make the H-SIZE adjustment is to correct the vertical wavy lines in
the zebra pattern.
 The picture may fl icker during the H-SIZE, H/V-POSITION adjustment.
 In case the picture frame is bigger or smaller than the data display area after the
H-SIZE adjustment, repeat steps from .
OPERATING THE MONITOR 17