Iiyama ProLite T1532MSC-B1AG User Manual page 17

Adjustment Item
OSD H-POSITION
OSD V-POSITION
OSD TIMEOUT
RESET
INPUT SELECT
NOTE
However it will automatically be selected when just one source is using.
In Power Management Mode input switching is disabled.
Input source is fi xed, not selected automatically when VGA and DVI which are selected.
Available for ProLite T1532MSC-B1X, ProLite T1532MSC-B3, ProLite T1732MSC-B1X,
Direct
ProLite T1932MSC-B1X and ProLite T1932MSC-B2X only.
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
 INPUT SELECT: Pressing and holding of the
is not displayed. When both VGA and DVI signal inputs are connected to a
signal source, you can switch between them by successively pressing the
Button.
O SD H - P OS ITIO N
O S D V- P OS ITIO N
O SD TI MEO U T
R E SE T
IN P U T SE LEC T
Problem / Option
OSD is too left
OSD is too right
OSD is too low
OSD is too high
You can set the OSD display duration time
between 5 and 60 seconds.
Factory-preset data is restored.
Search for an available input source and select
automatically. Available for ProLite T1532MSC-B1X,
AUTO
ProLite T1532MSC-B3, ProLite T1732MSC-B1X, ProLite
Direct
T1932MSC-B1X and ProLite T1932MSC-B2X only.
VGA Select the analog input.
DVI Select the digital input.
Button for about 3 seconds when the Menu
OPERATING THE MONITOR 13
Button to Press