Gigabyte GA-8TM User Manual page 70

Disabled Disable OnBoard Serial port A.
OnBoard Serial Port B
Auto BIOS will automatically setup the port B address. (Default Value)
3F8/COM1 Enable OnBoard Serial port B and address is 3F8.
2F8/COM2 Enable OnBoard Serial port B and address is 2F8.
3E8/COM3 Enable OnBoard Serial port B and address is 3E8.
2E8/COM4 Enable OnBoard Serial port B and address is 2E8.
Disabled Disable OnBoard Serial port B.
Serial Port B Mode
(This item allows you to determine which Serial Port B Mode of onboard I/O chip)
Set onboard I/O chip Serial Port B to Normal Mode. (Default Value)
Normal
IrDA Set onboard I/O chip Serial Port B to IrDA Mode.
ASKIR Set onboard I/O chip Serial Port B to ASKIR Mode.
IR Duplex Mode
IR Function Duplex Half. (Default Value)
Half Duplex
IR Function Duplex Full.
Full Duplex
OnBoard CIR port
Disabled Disable this function. (Default Value)
Enabled Enable Onboard CIR port.
CIR IRQ Select
IRQ 3 / 4 / 9 / 10 (Default Value) / 11
OnBoard Parallel port
378 Set On Board LPT port and address to 378.
278 Set On Board LPT port and address to 278.
3BC Set On Board LPT port and address to 3BC.
Auto Set On Board LPT port Automatically. (Default Value)
Disabled Disable this function.
62
BIOS Setup