Gigabyte GA-8TM User Manual page 41

8TM Motherboard
JP20: Rear USB Device Wake up Selection (USB Connector
Please note:
To use "USB KB/MS Wakeup from S3" function, set BIOS setting "USB KB/MS
Wake up from S3" to ENABLED and enable jumpers JP20&JP17. To prevent
user confusion, it is recommended to enable, jumper JP21 (Front USB Device
wake-up function).
*(Power on the computer and as soon as memory counting starts, press
<Del>. You will enter BIOS Setup. Select the item "POWER MANAGEMENT
SETUP", then select "USB KB/MS Wake up from S3". Remember to save the
setting by pressing "ESC" and choose the "SAVE & EXIT SETUP" option.)
JP21: Front USB Device Wake up Selection (USB Port
Please note:
To use "USB KB/MS Wakeup from S3" function, set BIOS setting "USB KB/MS
Wake up from S3" to ENABLED and enable jumpers JP21&JP17. To prevent
user confusion, it is recommended to enable, jumper JP20 (Front USB Device
wake-up function).
*(Power on the computer and as soon as memory counting starts, press
<Del>. You will enter BIOS Setup. Select the item "POWER MANAGEMENT
SETUP", then select "USB KB/MS Wake up from S3". Remember to save the
setting by pressing "ESC" and choose the "SAVE & EXIT SETUP" option.)
1
Normal
(Default)
CN7
Pin No.
1-2 close
2-3 close Normal (Default)
CN10
1
Normal
(Default)
Pin No.
Front USB Device
1-2 close
Wakeup Enable
2-3 close Normal (Default)
33
CN7)
1
Enable
Definition
Rear USB Device
Wakeup Enable
CN10)
1
Enable
Definition