Panel And Jumper Definition - Gigabyte GA-8TM User Manual

8TM Motherboard

Panel And Jumper Definition

J7: For 2X11 Pins Jumper
GN (Green Switch)
GD (Green LED)
HD (IDE Hard Disk Active LED)
SPK (Speaker Connector)
RE (Reset Switch)
P+P P (Power LED)
PW (Soft Power Connector)
Please note:
Please connect the power LED, PC speaker, reset switch and power switch etc of
your chassis front panel to the front panel jumper according to the pin assignment above.
1
1
1
1
1
Open: Normal Operation
Close: Entering Green Mode
Pin 1: LED anode(+)
Pin 2: LED cathode( )
Pin 1: LED anode(+)
Pin 2: LED cathode( )
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data( )
Open: Normal Operation
Close: Reset Hardware System
Pin 1: LED anode(+)
Pin 2: LED cathode( )
Pin 3: LED cathode( )
Open: Normal Operation
Close: Power On/Off
27