Power Management Setup - Gigabyte GA-8TM User Manual

8TM Motherboard

Power Management Setup

AMIBIOS SETUP – POWER MANAGEMENT SETUP
( C ) 1999 American Megatrends, Inc. All Rights Reserved
ACPI Sleep Type
USB Dev Wakeup From S3
Suspend Time Out (Minute)
Throttle Slow Clock Ratio
Soft-Off by Power Button
System After AC Back
ModemRingOn/WakeOnLan
PME Event Wake Up
Resume by RTC Alarm
RTC Alarm Date
RTC Alarm Hour
RTC Alarm Minute
RTC Alarm Second
KB & PS/2 Mouse Access
FDC/LPT/COM Ports Access
Pri. Master IDE Access
Pri. Slave IDE Access
Sec. Master IDE Access
Sec. Slave IDE Access
PIRQ[A] IRQ Active
ACPI Sleep Type
S1/POS Set ACPI Sleep Type to S1/POS (Power On Suspend). (Default value)
S3/STR Set ACPI Sleep Type to S3/STR (Suspend To RAM).
USB Dev Wakeup From S3
USB Device Wakeup From S3 can be set when ACPI Sleep Type set to S3/STR.
Enabled
Disabled
Suspend Time Out (Minute)
System enters suspend power state when the length of period selected by this optional
has expired.
Disabled
1Minute ~ 60 Minute
Throttle Slow Clock Ratio
This option determines the duty cycle of the throttling when thermal override
condition occurs.
12.5%/25.0%/37.5%/50.0% (Default Value)/62.5%/75.0%/87.5%
: S1/POS
: Disabled
: Disabled
: 50.0%
: Instant Off
: Off
: Enabled
: Enabled
: Disabled
: Event Day
: 00
: 00
: 00
: Monitor
: Monitor
: Monitor
: Ignore
: Monitor
: Ignore
: Ignore
Figure 5: Power Management Setup
Enable USB Device Wakeup From S3.
Disable USB Device Wakeup From S3. (Default value)
Disable the timer to enter suspend mode. (Default Value)
Set the timer to enter suspend mode.
55
PIRQ[B] IRQ Active
PIRQ[C] IRQ Active
PIRQ[D] IRQ Active
ESC: Quit
F1 : Help PU/PD+/-/ : Modify
F5 :Old Values(Shift)F2:Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
: Ignore
: Ignore
: Ignore
: Select Item