Table of Contents
Advertisement
HOW TO USE
Press spray button a couple of times to moisten the laundry if necessary,
before spraying make sure that there is enough water in water tank. A few
presses might be required to pump the water through on first use
Steam shot function is best used at max temperature, as it helps remove
stubborn creases.
The iron has an anti-drip function: if you are ironing dense garments for a long
time, the sole plate temperature can drop. To prevent water coming from the
sole plate, the iron will automatically reduce the steam output.
"Steam shot" can also be applied when holding the iron in a vertical position,
so this is useful for removing creases from hung clothes, curtains, etc.
IRONING TIPS
Always check first whether a label with ironing instructions is attached to the article.
The iron heats up quicker than it cools down, therefore, you should start ironing the
articles requiring the lowest temperature such as those made of synthetic fibres.
If the fabric consists of various kinds of fibres, you must always select the lowest
ironing temperature to iron the composition of those fibres.
Silk and other fabrics that are likely to become shiny should be ironed on the inner
side.
To prevent staining do not spray water straight on silk or other delicate fabrics.
Velvet and other textures that rapidly become shiny should be ironed in one direction
with light pressure applied. Always keep the iron moving at any given moment.
Pure woollen fabrics (100% wool) may be ironed with the iron set a steam position.
Preferably set steam button to the maximum position and use a dry cloth as a mat.
Note: when ironing woollen fabrics, shining of the fabric may occur. So it is suggested
that you should turn the article inside out and iron the reverse side.
7
SI30130N_IM.indd 7
14/03/2018 11:10
Advertisement
Table of Contents
