Table of Contents
Advertisement
HOW TO USE
Before first use
Remove any stickers, protective foil or storage cover from the sole plate.
Heat up the iron to maximum temperature and iron over a piece of damp
cloth for several minutes for the purpose of removing any residue on the sole
plate.
Note: It is normal for a strange odour to come from the unit during the first
use. This is due to light oils used to preserve components during manufacture.
The odour will disappear after first use.
Operation
Open the water tank cover, then add clean water into the water tank (use
beaker not tap). For best results and longer product life, use bottled or
purified water – especially if you live in a hard water area. Make sure not
to exceed Max level on the tank. NOTE: IF YOU OVER FILL THE TANK THE
WATER WILL LEAK BACK OUT AGAIN WHEN YOU PUT THE IRON UPRIGHT.
Press down cover of water tank and you will hear a click if it is in the correct
position.
Connect plug to outlet and turn temperature dial to your desired setting,
which is determined by the type of fabric you intend to iron. The indicator light
will illuminate.
Make sure steam control is on dry (0) position then place the iron vertically
Once sole plate temperature has reached the preset temperature, indicator
light will turn off, then set steam dial to your desired steam output or dry
position and begin ironing. WARNING: Not touch the sole plate at any time
during ironing. It will be very hot.
6
SI30130N_IM.indd 6
14/03/2018 11:10
Advertisement
Table of Contents
