IDE1 Conductor Cable
Auto
ATA66/100
ATA33
IDE2 Conductor Cable
Auto
ATA66/100
ATA33
On-Chip Primary PCI IDE
Enabled
Enable onboard 1st channel IDE port. (Default value)
Disabled
Disable onboard 1st channel IDE port.
On-Chip Secondary PCI IDE
Enabled
Enable onboard 2nd channel IDE port. (Default value)
Disabled
Disable onboard 2nd channel IDE port.
USB Controller
Enabled
Enable USB Controller. (Default value)
Disabled
Disable USB Controller.
USB Legacy Support
Enabled
Enable USB Legacy Support.
Disabled
Disable USB Legacy Support. (Default value)
Will be automatically detected by BIOS. (Default Value)
Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE device
and cable is compatible with ATA66/100).
Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and
cable is compatible with ATA33).
Will be automatically detected by BIOS. (Default Value)
Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE device
and cable is compatible with ATA66/100).
Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and
cable is compatible with ATA33).
3 1
BIOS Setup