Onboard Ide; Usb Controller - Gigabyte GA-8SDX User Manual

GA-8SDX Motherboard
? IDE1 Conductor Cable
Will be automatically detected by BIOS. (Default Value)
?Auto
Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE device
?ATA66/100
and cable is compatible with ATA66/100).
Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and
?ATA33
cable is compatible with ATA33).
? IDE2 Conductor Cable
Will be automatically detected by BIOS. (Default Value)
?Auto
Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE device
?ATA66/100
and cable is compatible with ATA66/100).
Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and
?ATA33
cable is compatible with ATA33).

? OnBoard IDE

Disable OnBoard IDE.
?Disabled
Both Primary & Secondary IDE channel will be enabled. (Default Value)
?Both
Only Primary IDE channel is enabled.
?Primary
Only Secondary IDE channel is enabled.
?Secondary
? AC97 Modem
BIOS will search MC97 Codec (AMR Modem Card). If found, MC97 function
?Enabled
will be enabled. If no MC97 Codec found, MC97 function will be disabled.
(Default Value)
Disable this function.
?Disabled

? USB Controller

Enable USB Controller. (Default value)
?Enabled
Disable USB Controller.
?Disabled
34