Table of Contents
Advertisement
Introduction
Congratulations and thank you for purchasing Beale Basics Series speakers
from Beale Street Audio!
Beale Basics In-Ceiling speakers install with ease using the 'dog' mounting
system and magnetic grilles for fast, clean installations.
Please follow the instructions in this manual to assure proper installation
and to achieve the full performance and satisfaction you would expect from
Beale Street Audio.
Speaker Wire
For the IC6-BSC and IC8-BSC, pull one run of 16-2 stranded speaker wire
from the amplifier location to each speaker location.
For the IC6DT-BSC, pull one run of 16-4 or 2 runs of 16-2 speaker wire
from the amplifier location to each speaker.
If in pre-wire, while the walls are open and it's easy, pull extra wire to any
location that may be desirable to add speakers later. Leave extra length
of wire on each end to allow making connections and installing/removing
speakers.
2
Advertisement
Table of Contents
