Ir Duplex Mode; Onboard Parallel Port - Gigabyte GA-8ITXE User Manual

GA-8ITXE Motherboard
Onboard Serial Port B
Auto
3F8/COM1
2F8/COM2
3E8/COM3
2E8/COM4
Disabled
Serial Port B Mode
(This item allows you to determine which Infra Red(IR) function of Onboard I/O chip)
ASKIR
IrDa
Normal

IR Duplex Mode

Half Duplex
Full Duplex
OnBoard CIR Port
Disabled
Enabled
CIR IRQ Select
IRQ 3 / 4 / 9 / 10 (Default Value) / 11

Onboard Parallel Port

378
278
3BC
Auto
Disabled
BIOS will automatically setup the port B address. (Default Value)
Enable onboard Serial port B and address is 3F8.
Enable onboard Serial port B and address is 2F8.
Enable onboard Serial port B and address is 3E8.
Enable onboard Serial port B and address is 2E8.
Disable onboard Serial port B.
Set onboard I/O chip UART to ASKIR Mode.
Set onboard I/O chip UART to IrDa Mode.
Set onboard I/O chip UART to Normal Mode. (Default Value)
IR Function Duplex Half. (Default Value)
IR Function Duplex Full.
Disable this function. (Default Value)
Enable Onboard CIR port.
Set On Board LPT port and address to 378.
Set On Board LPT port and address to 278.
Set On Board LPT port and address to 3BC.
Set On Board LPT port Automatically. (Default Value)
Disable onboard Serial port A.
4 6