Cpu Heat Sink Installation - Gigabyte GA-8ITXE User Manual

CPU Heat Sink Installation

1. Fasten the heatsink supporting-base
onto the CPU socket on the main-
board.
Please use Intel approved cooling fan.
We recommend you to apply the thermal tape to provide better heat
conduction between your CPU and heatsink.
(The CPU cooling fan might stick to the CPU due to the hardening of the
thermal paste. During this condition if you try to remove the cooling fan, you
might pull the processor out of the CPU socket alone with the cooling fan, and
might damage the processor. To avoid this from happening, we suggest you to
either use thermal tape instead of thermal paste, or remove the cooling fan with
extreme caution.)
Make sure the CPU fan power cable is plugged in to the CPU fan connector,
this completes the installation.
Please refer to CPU heat sink user's manual for more detail installation
procedure.
2. Make sure the CPU fan is plugged
to the CPU fan connector, than
install complete.
1 1
Hardware Installation Process