Onboard Fdc Controller; Ir Duplex Mode; On Board Parallel Port - Gigabyte GA-6CMC7 User Manual

6CMC7/ 6CMC7R Motherboard

OnBoard FDC Controller

Auto
Disabled
Enabled
On Board Serial Port A
Auto
3F8/COM1
2F8/COM2
3E8/COM3
2E8/COM4
Disabled
On Board Serial Port B
Auto
3F8/COM1
2F8/COM2
3E8/COM3
2E8/COM4
Disabled
Serial Port B Mode
Normal
IrDA
ASKIR

IR Duplex Mode

Half Duplex
Full Duplex

On Board Parallel port

378
278
3BC
Auto
Set OnBoard FDC Controller is Auto.
Disabled OnBoard FDC Controller.
Enabled OnBoard FDC Controller. (Default Value)
BIOS will automatically setup the port A address. (Default Value)
Enable on Board Serial port A and address is 3F8.
Enable on Board Serial port A and address is 2F8.
Enable on Board Serial port A and address is 3E8.
Enable on Board Serial port A and address is 2E8.
Disable on Board Serial port A.
BIOS will automatically setup the port B address. (Default Value)
Enable on Board Serial port B and address is 3F8.
Enable on Board Serial port B and address is 2F8.
Enable on Board Serial port B and address is 3E8.
Enable on Board Serial port B and address is 2E8.
Disable on Board Serial port B.
Normal operation. (Default Value)
Onboard I/O chip supports IrDA.
Onboard I/O chip supports ASKIR.
IR Function Duplex Half. (Default Value)
IR Function Duplex Full.
Enable On Board LPT port and address is 378.
Enable On Board LPT port and address is 278.
Enable On Board LPT port and address is 3BC.
Set On Board LPT port is Auto. (Default Value)
65