Halt On BIOS Defects : Disabled(Default), Enabled
If the BIOS occurs a checksum error or the Main BIOS occurs a WIDE RAN GE PROTEC TION
error and H alt On BIOS Defects set to Enable, the P C w ill show messages on the boot screen,
and the system w ill pause and w ait for the user's instruction.
If Auto Recovery :Disabled, it w ill show <or the other key to continue.>
If Auto Recovery :Enabled, it w ill show <or the other key to Auto Recover.>
Auto Recovery : Enabled(Default), Disabled
When one of the Main BIOS or Backup BIOS occurs checksum failure, the w orking BIOS w ill
automatically recover the BIOS of checksum failure.
(In the Pow er Management Setup of the BIO S Setting, if AC PI Suspend Type is set to Suspend
to RAM , the Auto Recovery w ill be set to Enable automatically.)
(If y ou w ant to enter the BIOS setting, please press " Del" key w hen the boot screen appears.)
Boot From : Main BIOS(Default), Backup BIOS
Status 1:
The user can set to boot from main BIOS or Backup BIOS.
Status 2:
If one of the main BIOS or the Backup BIOS fails, this item "Boot From : Main BIOS(Default)
" w ill become gray and w ill not be changed by user.
BIOS Recovery : Main to Backup
Auto recovery message:
BIOS Recovery: Main to Backup
The means that the Main BIOS w orks normally and could automatically recov er the B ackup
BIOS.
BIOS Recovery: Backup to Main
The means that the Backup BIOS w orks normally and could automatically recover the Main
BIOS.
(This auto recovery utility is set by sy stem automatically and can't be changed by user.)
43
Technical Reference