GA-8IRXP Motherboard
Enable onboard Serial port 1 and address is 2E8.
?2E8/IRQ3
Disable onboard Serial port 1.
?Disabled
?Onboard Serial Port 2
BIOS w ill automati c ally setup t h e port 2 address.
?Auto
Enable onboard Serial port 2 and address is 3F8.
?3F8/IRQ4
Enable onboard Serial port 2 and address is 2F8. (Default Value)
?2F8/IRQ3
Enable onboard Serial port 2 and address is 3E8.
?3E8/IRQ4
Enable onboard Serial port 2 and address is 2E8.
?2E8/IRQ3
Disable onboard Serial port 2.
?Disabled
? UART Mode Select
(T his feat u re allow s y ou to determine which Inf r a Red(IR) function of Onboard I/O chip)
Set onboard I/O chip UART to ASKIR Mode.
?ASKIR
Set onboard I/O chip UART to IrDA Mode.
?IrDA
Set onboard I/O chip UART to Normal Mode. (Default Value)
?Normal
? RxD, TxD Active
This feature is available only if the item, U AR T 2 Mode, is set at ASKIR or IrDA . The feature
allow s you to select the active signals of the recception end and the transmission end.
?Hi, Hi
Set Rx D,Tx D Activ e t o Hi, Hi.
?Hi, Lo
Set Rx D,Tx D Activ e t o Hi, Lo. (Default Value)
?Lo, Hi
Set Rx D,Tx D Activ e t o Lo, Hi.
?Lo, Lo
Set Rx D,Tx D Activ e t o Lo, Lo.
?IR Transmission Delay
Enabl e d IR T ransmission delay. (Default Value)
?Enabled
Enabled I R T ransmissi o n del a y.
?Disabled
20