Clas Ohlson YP-04238/01 Quick Start Manual

Digital Watch
Art.no 36-4046-1 Model YP-04238/01
Please read the entire instruction manual before using the product
and save it for future reference. We reserve the right for any errors in
text or images and any necessary changes made to technical data.
If you have any questions regarding technical problems please contact
Customer Services.
Product description
Digital wristwatch with alarm, date, stopwatch with lap times,
countdown timer, dual time zones and multi-coloured backlight. Water
resistant to 10 ATM.
Buttons
A
B
A. Reset button
B. Mode button
C. Backlight button
D. Start/stop button
Display
Alarm
Day of week
Hours
Features
Press MODE (B) repeatedly to change functions. The sequence is:
Time, alarm, stopwatch, countdown function (timer), additional time
zone.
A. Time
• 12/24-hour display
• Hours, minutes, seconds, day and date display.
• 50-year calendar. (2000–2049)
B. Alarm AL
Alarm sounds daily at
the set time.
C. Stopwatch ST
• Accuracy: 1/100 second.
• Stopwatch range: 00:00:00–59:59:99
D. Countdown timer TR
Countdown range: 59:59:00–00:00:00
E. Dual time zones T2
Dual time zone display.
GREAT BRITAIN
customer service tel 020 8247 9300 e-mail customerservice@clasohlson.co.uk
internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Use
Setting the time
1. When the watch is in time display
D
5. Repeat steps 3 and 4 for the remaining settings. The settings
6. Push RESET (A) when you have completed inputting all your
C
Switching between a 12 and 24 hour display
When the watch is in time display mode press
RESET (A) once to switch between 12 and 24
hour display. "PM" is shown for the 12 hour display
and "24H" for the 24 hour display.
Date
Hourly chime
Displaying the date
Seconds
When the watch is in time display mode press
and hold start/stop to display the date and year.
Minutes
Alarm & hourly chime
When the alarm is activated the signal will sound daily at the preset
time. Turn the alarm off by pressing any button when the alarm sounds.
Otherwise the alarm will sound for about 60 sec. With the hourly
chime activated the watch will sound every hour on the hour.
Setting the alarm
1. With the watch in time display mode press
3. Press MODE to switch to the next setting.
5. Press RESET to save your settings when
mode press and hold RESET (A) until
the seconds display starts to flash.
2. Press start/stop (D) to reset the seconds display.
3. Press MODE (B) to switch
to the next setting.
4. Press start/stop (D)
repeatedly to increase
the digits incrementally. Hold the button in to
increase the digits quickly.
sequence is as follows: Seconds – hours – minutes – year –
month – date.
settings. The day is automatically set when the year, month
and date is set.
MODE the required number of times to
reach the alarm settings. Press RESET once.
The alarm symbol will be displayed and
the hour display will begin flashing.
2. Press start/stop to incrementally increase
the digits. Hold the button in to increase
the digits quickly.
4. Press start/stop to incrementally increase
the digits. Hold the button in to increase
the digits quickly.
you have completed inputting them. Press
MODE the required amount of times return
to normal time display.