Clas Ohlson Prologue MR-8815 Manual
Clas Ohlson Prologue MR-8815 Manual

Clas Ohlson Prologue MR-8815 Manual

Advertisement

Available languages
  • EN

Available languages

Quick Links

Watch
Art.no 36-5605
Model MR-8815
Please read the entire instruction manual before using
the product and then save it for future reference. We reserve
the right for any errors in text or images and any necessary
changes made to technical data. In the event of technical
problems or other queries, please contact our Customer
Services.
Things to consider
Never try to open the watch or to remove the back of
the casing.
Never push any of the buttons whilst under water.
The watch is constructed to withstand bumps and
vibrations but should not be subjected to undue impacts
or rough treatment.
Avoid exposing the watch to extreme temperatures.
Avoid exposing the watch to environments where there
is electromagnetic radiation.

Buttons and functions

A. [ LIGHT ] backlight
B. [ MODE ] Function selector
C. [ START ] Start/stop
D. [ RESET ] Reset button

Operating instructions

Selecting functions

Press [ MODE ] repeatedly to move between the different
functions, in the following order: time – stopwatch – alarm.

Setting the time

1. Press [ MODE ] 3 times until
the seconds start to flash.
2. Press [ START ] to reset
the seconds to zero.
3. Press [ RESET ] – the minutes
will flash.
4. Press or hold in [ START ] to
set the minutes.
5. Press [ RESET ] – the hours
will flash.
6. Press or hold in [ START ] to set the hours. Set the month,
date and day in the same way.
7. Press [ MODE ] to complete the settings.

Stopwatch

Press [ MODE ] until the stopwatch is displayed.

Timekeeping

1. Press [ START ] to start
the stopwatch.
2. Press [ START ] to stop
the stopwatch.
3. Press [ RESET ] to reset
the stopwatch time to zero.
GREAT BRITAIN • CUSTOMER SERVICE tel: 0845 300 9799
e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
A
C
B
D

Timekeeping with split times

1. Press [ START ] to start the stopwatch.
2. Press [ RESET ] to take a split time.
3. Press [ RESET ] again to resume the timekeeping.
4. Press [ START ] to stop the stopwatch.
5. Press [ RESET ] to reset the stopwatch time to zero.

Timekeeping with 2 finishing times

1. Press [ START ] to start the stopwatch.
2. Press [ RESET ] to take the first finishing time. Write the time
down. The time for the second finishing time is running
undisplayed within the stopwatch.
3. Press [ START ] to take the second finishing time.
4. Press [ RESET ] to reset the stopwatch time to zero.

Alarm

1. Press [ MODE ] until the alarm
is displayed. The hours start
to flash.
2. Press or hold in [ START ] to
set the hours.
3. Press [ RESET ] – the minutes
will flash.
4. Press or hold in [ START ] to
set the minutes.
5. Press [ MODE ] to complete
the alarm settings.
-
Press [ START ] to switch the alarm off and let it
sound again at the same time the next day or
an hour later depending on the type of alarm
(see Type of alarm below).
-
Press [ RESET ] to completely switch the alarm off.

Type of alarm

Press [ RESET ] (in time display mode) to set the type of alarm:
When
appears on the display: the alarm sounds at
the set time.
When
appears on the display: the alarm sounds on
the hour every hour.
When
appears on the display: the alarm sounds at
the set time and on the hour every hour.
12 or 24 hour time display
1. Press [ MODE ] three times until the seconds start to flash.
2. Press [ RESET ] two times until the hours start to flash.
3. Press or hold in [ START ] until the preferred time format
is displayed.
4. Press [ MODE ] to complete the setting.

Backlight

Press [ LIGHT ] whenever you need the backlight.
Care and maintenance
The watch can be wiped clean using a damp cloth. Use only
mild cleaning agents, never solvents or corrosive chemicals.
Disposal
This product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local council.

Specifications

Battery
SR2025 (included)
5 ATM
Water resistant to
Diam
45 mm
20140404

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Prologue MR-8815 and is the answer not in the manual?

Questions and answers

Summary of Contents for Clas Ohlson Prologue MR-8815

  • Page 1 20140404 Watch Timekeeping with split times 1. Press [ START ] to start the stopwatch. Art.no 36-5605 Model MR-8815 2. Press [ RESET ] to take a split time. 3. Press [ RESET ] again to resume the timekeeping. 4. Press [ START ] to stop the stopwatch. Please read the entire instruction manual before using 5.
  • Page 2 20140404 Armbandsklocka Tidtagning med mellantid 1. Tryck [ START ] för att starta tidtagningen. Art.nr 36-5605 Modell MR-8815 2. Tryck [ RESET ] för att ta mellantiden. 3. Tryck [ RESET ] igen för att fortsätta tidtagningen. 4. Tryck [ START ] för att stoppa tidtagningen. Läs igenom hela bruksanvisningen före användning och spara 5.
  • Page 3 20140404 Armbåndsur Tidtaking med mellomtid 1. Trykk på [ START ] for å starte tidtakingen. Art. nr. 36-5605 Modell MR-8815 2. Trykk [ RESET ] for å ta mellomtider. 3. Trykk på [ RESET ] igjen for å fortsette tidtakingen. 4.
  • Page 4 20140404 Rannekello Väliajat 1. Aloita ajanotto painamalla [ START ]. Tuotenro 36-5605 Malli MR-8815 2. Ota väliaika painamalla [ RESET ]. 3. Palaa ajanoton näyttöön painamalla [ RESET ]. 4. Lopeta ajanotto painamalla [ START ]. Lue käyttöohje ennen tuotteen käyttöä ja säilytä se 5.
  • Page 5 20140404 Armbanduhr Zeitmessung mit Zwischenzeit 1. Auf [ START ] drücken um die Zeitmessung zu starten. 2. Auf [ RESET ] drücken um die Zwischenzeit zu messen. Art.Nr. 36-5605 Modell MR-8815 3. Auf [ RESET ] drücken um die Zeitmessung fortzusetzen. 4. Auf [ START ] drücken um die Zeitmessung zu stoppen. Vor Inbetriebnahme die komplette Bedienungsanleitung durchlesen 5.

This manual is also suitable for:

36-5605

Table of Contents