Clas Ohlson 44-2890 Quick Start Manual

Digital Watch
Art.no 44-2890, 44-2891
Please read the entire instruction manual before use and then
save it for future reference. We reserve the right for any errors in
text or images and any necessary changes made to technical
data. In the event of technical problems or other queries,
please contact our Customer Services.
The letter buttons have the following functions:
M = MODE
L = LIGHT
S = START
R = RESET
Setting the time and date
1. While in time display mode, press M three times.
The seconds will flash.
2. Press S to reset the seconds to zero.
3. Press R. The minutes will flash.
4. Press or hold in S to set the minutes.
5. Press R. The hours will flash.
6. Press or hold in S to set the hours. Press until "A" or "P"
appears in the centre circle for 12-hour clock display or
press until "H" appears for 24-hour clock display.
7. Set the date (month and day) in the same way.
8. Press M to return to the time display mode.
9. Hold in S if you wish to view the set date.

Stopwatch

1. While in time display mode, press M once. The stopwatch
will appear.
2. Press S to start and stop the timekeeping, press R to zero
the stopwatch once it has been stopped.
GREAT BRITAIN • customer service tel: 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ

Split times

1. Press R while timekeeping to take a split time. The stopwatch
continues in the background. Press R again to resume
the timekeeping. The split time taking function can be
repeated as many times as required.
2. Press S to stop timekeeping and press R to zero the stopwatch.
Setting the alarm
1. While in time display mode, press M two times.
The hours will flash.
2. Press or hold in S to set the hours.
3. Press R. The minutes will flash.
4. Press or hold in S to set the minutes.
5. Press M to return to the time display mode.
6. Hold in R to display the set alarm time.
7. Press S or R to switch off the alarm when it sounds.
Activate/deactivate the alarm
The alarm activates automatically when the alarm time is set.
An alarm symbol appears. To deactivate the alarm, hold in R and
quick-press S. To reactivate the alarm, hold in R and press S again.

Activating/deactivating the hourly chime

To activate the chime, hold in R and quick-press M. To deactivate,
hold in R and press M again. When the chime is activated,
all the days of the week are shown until you release R.
When the chime is deactivated, none of the days of the week
are shown.

Backlight

Press L to switch the backlight on. The light will automatically
go out after a few seconds.

Care and maintenance

• Clean the product using a lightly moistened cloth. Use only
mild cleaning agents, never solvents or corrosive chemicals.
• Never try to open the casing.
• Do not press the buttons when the watch is under water.
• If there is any moisture inside the watch, contact our
customer service department immediately. Moisture inside
the watch could cause damage to the metal parts.
• The watch can withstand some rough treatment, but do not
expose it to unnecessary blows.
• Do not expose the watch to extreme temperatures.

Responsible disposal

This symbol indicates that this product should
not be disposed of with general household
waste. This applies throughout the entire EU. In
order to prevent any harm to the environment
or health hazards caused by incorrect waste
disposal, the product must be handed in for
recycling so that the material can be disposed
of in a responsible manner. When recycling
the product, take it to your local collection
facility or contact the place of purchase. They
will ensure that the product is disposed of in
an environmentally sound manner.

Specifications

44-2890
Battery 1 × CR2025
Diameter 22 mm
Accuracy ± 60 seconds/month
Water-resistant 50 m (5 ATM), can withstand occasional,
brief moments in water
44-2891
Battery 1 × CR2025
Diameter 30 mm
Accuracy ± 60 seconds/month
Water-resistant 50 m (5 ATM), can withstand occasional,
brief moments in water