Clas Ohlson 36-4123 Manual

Stopwatch
Art.no 36-4123
Please read the entire instruction manual before using the product and save it
for future reference. We reserve the right for any errors in text or images and
any neces-sary changes made to technical data. If you have any questions
regarding technical problems please contact Customer Services.
• Stopwatch with 30 lap-times. Calculates quickest lap and average lap time.
• Clock with dual time zones, timer, alarm and calendar. Lanyard and battery
included. Water resistant to 3 ATM.
Features
Time
Displays Hours/ Minutes / Seconds (in 12 or 24 hour format) and
Month / Date / Day.
Chronograph
Measures total time elapsed and can also show split times or lap times.
Chronograph data
Displays total time elapsed or per lap: Total time elapsed, Quickest lap and
Average lap time.
Timer
Programmable timer from 1 minute to 24 hours.

Button functions

• S1 [ MODE ]
• S2 [ SPLIT/RESET ]
S2
• S3 [ START/STOP ]
TIME (time display)
KEYS & FUNCTIONS TIME mode
Press S3 [ START/STOP ] to change
S1
between time zones (Time1 and
Time2). S2 S3
- Press S3 to toggle Time 1 and 2.
- To set TIME: Press S1 to scroll to Time Mode
if not already there.
- Press and hold S2 for 2 seconds to enter
settings. Time 1(T1) will start flashing.
Toggle with S3 to select Time 1 or 2. Press
S1 to confirm and proceed to hours.
GREAT BRITAIN • CUSTOMER SERVICE tel: 08545 300 9799 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk - Press S3 to increase, S2 to decrease digits.
S2|Split/Reset S1|Mode S3|Start/Stop Hold the button for fast scrolling. Press S1
Setting the time
1. Press S1 [ MODE ] to reach the "TIME" mode (time display).
2. Press and hold in S2 [ SPLIT/RESET ] for about 2 seconds to enter
the settings mode. "Time1" will begin flashing.
3. Select time zone (T1 or T2) by pressing S3. Press S1 to confirm and to
set the hours.
4. Press S3 to increase or S2 to decrease (keep the button depressed to
advance quickly).
5. Press S1 to confirm.
6. Follow the same procedures for: Minutes – Seconds – Year – Month –
12/24 hour display.
7. Zero the seconds display by pressing S1 or S3. (No AM/PM symbols are
visible when the 24 hour format is used). Turn the alarm signal ON/OFF
using S3. Press S1 to confirm.
CRONO (chronograph)
Calculates and saves lap and split times.
Fastest lap time signal.
Using the chronograph
1. Press S3. Lap and split times will be shown. Display order: 1/100
seconds, seconds, minutes (and hours if applicable). The upper row
displays lap time and the lower row displays split time (the current lap time
will flash in the upper row).
2. Press S2 after each lap to save the lap time. The saved lap time
will remain flashing for 2 seconds. If the current lap is the fastest
the "FASTEST" symbol will begin flashing in the upper row.
3. The upper row will then eventually return to normal time display for
the current lap. The lower row will display the total time elapsed and
then "Start".
4. Press S3 to "Pause"/"Stop" the time keeping. "PAUSE" will be displayed
and "Total time" + current lap number will flash alternately.
S1
5. Press S2 to restart timekeeping, or press S3 to stop.
a. If you want to save the chronograph times press and hold in S3 for
S3
2 seconds until "STORE DATA" appears. The chronograph is now
ready for the next session after saving any current chronograph times.
b. If you DON'T want to save the chronograph times press and hold
in S2 for 2 seconds until "CLEAR ALL" appears. The chronograph
is now ready for the next session and "RUN-01" will appear on the display.
Note: The chronograph will be ready for reuse but all saved data will
be deleted.
CHRONOGRAPH DATA mode
6. Displaying stored data from each timekeeping session: Lap time,
total time, fastest lap and average lap time.
Return to any desired saved chronograph session by pressing
S2 the required number of times to reach it.
Recall lap and split times for each indi-
7. Press S3 to display data for the desired session. Press S3 to display
vidual runs, lap times, total time,
the data for each lap. Lap data is displayed in this order: Lap time,
fastest lap, and average times.
total time, fastest lap and average lap time. - To recall the chronograph data, press S2 to
browse the number of Runs you want to
recall. Press S3 to browse the data of the
Run session.
- Press S3 to browse the data lap by lap and
the sequence will be from: individual lap
time, total elapsed time, best lap time and
average lap time.
ENGLISH
CHRONOGRAPH mode
Measure and record lap times and split
times up to 30 laps, with Fastest lap alarm.
To measure times with the chronograph:
- Press S3. The lap/split time display begins
with 1/100 seconds, then seconds, then
minutes. If the accumulated times in a
run proceed to hours, the elapsed hours
appear above the primary display and
replace 1/100 seconds in the secondary
display.
- The upper row of digits display the lap
time, and the lower row of digit display
the split time. The current lap number will
flash on the top row.
- Every time you finish one lap, press S2 to
record the lap time. The current recorded
lap will be flashing for 2 second. For any
fastest lap achieved, "FASTEST" will flash
on the top row for 2 seconds.
UK-6
CHRONOGRAPH DATA mode TIMER mode
TIMER mode
- Press and hold S2 for 2 seconds to enter
Set Mode. "HOLD / ADJUST" prompt will be
displayed for 1 second. The hour digit will
begin to flash.
- Press S3 to increase the digit, S2 to
decrease the digit. Hold the button for fast
- Press and hold S2 for 2 seconds to enter
scrolling. Press S1 to confirm and move to
Recall lap and split times for each indi- Set Mode. "HOLD / ADJUST" prompt will be
Minute adjustment.
vidual runs, lap times, total time, displayed for 1 second. The hour digit will
- After all adjustments are complete, press
fastest lap, and average times. begin to flash.
S1 to exit set mode.
- Press S3 to increase the digit, S2 to
- To recall the chronograph data, press S2 to
- Press S3 to start the countdown. Use S3 to
browse the number of Runs you want to decrease the digit. Hold the button for fast
pause and resume the countdown.
recall. Press S3 to browse the data of the scrolling. Press S1 to confirm and move to
- Press S1 to reset the countdown.
Minute adjustment.
Run session.
- Once the countdown reaches zero, the
- Press S3 to browse the data lap by lap and - After all adjustments are complete, press
stopwatch will start counting up to record
the sequence will be from: individual lap S1 to exit set mode.
how long time has elapsed since the
- Press S3 to start the countdown. Use S3 to
time, total elapsed time, best lap time and
countdown ended. Press S3 to pause and
average lap time. pause and resume the countdown.
S1 to reset.
- Press S1 to reset the countdown.
- There will be an alert 5 seconds before the
- Once the countdown reaches zero, the
countdown ends.
stopwatch will start counting up to record
how long time has elapsed since the
UK-8
countdown ended. Press S3 to pause and
S1 to reset.
- There will be an alert 5 seconds before the
countdown ends.
Timer (countdown timer)
CHRONOGRAPH DATA mode
1. Press and hold in S2 for approx. 2 seconds to
activate the "Settings Mode". "HOLD/ADJUST"
will be displayed for 1 second. The hours display
will begin to flash.
2. Press S3 to increase or S2 to decrease. Keep the button depressed to
advance quickly. Press S1 to confirm and to advance to the "Minutes"
setting.
3. Press S1 when you have completed entering your settings and wish to
exit the settings mode.
Recall lap and split times for each indi-
4. Press S3 to start the countdown. Press S3 to pause/return to the countdown.
vidual runs, lap times, total time,
5. Push S1 to reset the timer.
fastest lap, and average times.
- To recall the chronograph data, press S2 to
6. About 5 seconds before the countdown reaches 0 a warning buzzer will be
browse the number of Runs you want to
heard. Once the timer reaches 0 it will reverse and begin counting upwards.
recall. Press S3 to browse the data of the
Run session.
Alarm
- Press S3 to browse the data lap by lap and
the sequence will be from: individual lap
ALARM mode
time, total elapsed time, best lap time and
average lap time.
1. Switch the alarm "OFF" and "ON"
- The upper row of digits will return to show
the elapsed time for the next lap after the
by pressing S3. When the alarm is
flash. The lower row of digits will remain
activated (ON) an alarm (bell) symbol
displaying the split time non-stop.
UK-8
will appear on the display.
- Press S3 to pause / stop the stopwatch.
Prompt "PAUSE" will be displayed and the
2. Press and hold in S2 for approx. 2 seconds to enter the Settings Mode. total elapsed time + current lap number
- You can toggle between ON/OFF by press-
will flash alternatively. You can either press
"HOLD/ADJUST" will be displayed for 1 second. The hours display will ing S3. If the alarm function is "ON", the
S2 to resume the stopwatch, or you can
alarm icon will be visible.
begin to flash.
press S3 to end the stopwatch.
- Press and hold S2 for 2 seconds to enter
3. Press S3 to increase or S2 to decrease. Keep the button depressed to
- If you want to store the chronograph data,
Set Mode. "HOLD / ADJUST" prompt will be
you can hold S3 for 2 seconds, and the
displayed for 1 second. The hour digit will
advance quickly. Press S1 to confirm and to advance to the Minutes setting.
begin to flash.
prompt "STORE DATA" will appear. It will
4. Press S1 when you have completed entering your settings and wish
- Press S3 to increase the digit, S2 to
switch to another run after the data is
to exit the settings mode.
decrease the digit. Hold the button for fast
stored. (only when the session has ended.)
scrolling. Press S1 to confirm and move to
5. The alarm will sound for 30 seconds once the preset alarm time is reached, - If you want to clear the data, you can hold
Minute adjustment.
S2 for 2 seconds to clear the chronograph
if the alarm is activated. Push any button to turn off the alarm.
- After all adjustments are complete, press
data. The prompt " CLEAR ALL" will be
S1 to exit set mode.
displayed while you hold the key, and it
- The alarm will sound for 30 seconds when

Care and maintenance

will return to RUN –01. Please
the alarm function is "ON". Press any button
note that ALL the data inside the Chrono
to stop the alarm sound.
data will be erased, and the display will
• Never try to disassemble or repair the stopwatch. return to RUN –01.
• Protect the stopwatch from extreme heat, knocks or blows, and
UK-10
prolonged exposure to direct sunlight.
• The stopwatch can be cleaned with a lightly moistened cloth. Add a little UK-7
mild detergent for stubborn grime. NEVER use strong solvents or cleaning
agents like petrol, thinners, alcohol, etc. These can damage the housing
and seals.
• Store the stopwatch in a dry location when not in use.
• Do not let the stopwatch come into contact with hair care products,
cologne, sun-block or other substances which can damage the housing.
If any of these substances come into contact with the stopwatch, wipe it
off immediately with a soft, dry washcloth.
Disposal
Follow local ordinances when disposing of this product. If you are unsure of
how to dispose of this product, please contact your municipality.

Specifications

Battery CR2032 (3 V)
3 ATM
Water resistant
UK-9
TIMER mode
- Press and hold S2 for 2 seconds to enter
Set Mode. "HOLD / ADJUST" prompt will b
displayed for 1 second. The hour digit wil
begin to flash.
- Press S3 to increase the digit, S2 to
decrease the digit. Hold the button for fas
scrolling. Press S1 to confirm and move to
Minute adjustment.
- After all adjustments are complete, press
S1 to exit set mode.
- Press S3 to start the countdown. Use S3 t
pause and resume the countdown.
- Press S1 to reset the countdown.
- Once the countdown reaches zero, the
stopwatch will start counting up to record
how long time has elapsed since the
CARE &
countdown ended. Press S3 to pause and
S1 to reset.
- Never a
- There will be an alert 5 seconds before th your sto
countdown ends. - Protect
shocks
sunligh U
- The sto
lightly m
to the a
marks. D
strong c
solvent
lents, as
case an
- Store yo
you are
- Avoid a
direct c
sun blo
which c
tic parts
stopwa
or othe
with a d