Step 2: Install Memory Modules - Gigabyte GA-8IG1000MT User Manual

Step 2: Install Memory Modules

Before installing the memory modules, adhere to the following warning:
1. When RAM LED is ON, do not install / remove DIMM from socket.
2. Please note that the DIMM module can only fit in one direction due to
the one notch. Wrong orientation will cause improper installation.
Please change the insert orientation.
The motherboard has 2 dual inline memory module (DIMM) sockets. The BIOS will automatically
detects memory type and size. To install the memory module, just push it vertically into the DIMM
socket. The DIMM module can only fit in one direction due to the notch. Memory size can vary
between sockets.
GA-8IG1000MT Motherboard
1. The DIM M socket has a notch, so the DIMM m em ory
module can only fit in one direction.
2. Insert the DIMM mem ory module vertically into the DIMM
socket. Then push it down.
3. Close the plastic clip at both edges of the DIMM sockets
to lock the DIMM m odule.
Reverse the installation steps when you wish to remove
the DIMM module.
- 14 -
Notch
DDR