Chapter 1 Introduction; Features Summary - Gigabyte GA-8IG1000MT User Manual

Chapter 1 Introduction

Features Summary

Form Factor — 24.4cm x 22.5cm Micro ATX size form factor, 4 layers PCB
CPU — Socket 478 for Intel
— Support Intel
— Support Intel
— Intel
— 2nd cache depends on CPU
Chipset — Intel
— Intel
Memory — 2 184-pin DDR DIMM sockets
— Supports Dual Channel DDR400/DDR333/DDR266 DIMM
— Supports 128MB/256MB/512MB/1GB unbuffered DRAM
— Supports up to 4GB DRAM (Max)
— Supports only DDR DIMM
I/O Control — ITE8712F
Slots — 3 PCI slot supports 33MHz & PCI 2.3 compliant
On-Board IDE — 2 IDE controllers provides IDE HDD/CD-ROM (IDE1, IDE2) with
— Can connect up to 4 IDE devices
Serial ATA — 2 Serial ATA connectors in 150 MB/s operation mode
— Controlled by ICH5
On-Board Peripherals — 1 Floppy port supports 2 FDD with 360K, 720K,1.2M, 1.44M
— 1 Parallel port supports Normal/EPP/ECP mode
— 2 Serial ports (COMA and COMB)
— 8 USB 2.0/1.1 ports (4 x Rear, 4 x Front by cable)
— 1 IrDA connector for IR
— 1 Front Audio connector
Due to chipset (Intel 865G) architecture limitation, DDR 400 mem ory module is only supported
when using FSB 800 Pentium 4 processor. A FSB 533 Pentium 4 processor will support
DDR333 and DDR266 memory module. A FSB 400 Pentium 4 processor will only support
DDR 266 mem ory module.
Micro FC-PGA2 Pentium
®
Pentium 4 (Northwood, Prescott) processor
® ®
Pentium 4 Processor with HT Technology *
® ®
Pentium 4 800/533/400MHz FSB
® ®
Chipset 865G HOST/AGP/Controller
®
ICH5 I/O Controller Hub
®
PIO, Bus Master (Ultra DMA33/ATA66/ATA100) operation modes
and 2.88M bytes
- 5 -
4 processor
®
to be continued......
Introduction