Table of Contents
Advertisement
Cleaning and maintenance
USER-MAINTENANCE INSTRUCTIONS
Your appliance is designed to give you years of service.
Observe the following instructions to maintain your
appliance and keep it in top operating condition.
WARNING
9
RISK OF EXPLOSION
Never use solvents or highly flammable liquids for
cleaning.
CAUTION
9
Improper cleaning may damage the dryer or cause
injury.
Do not spray with a hose or pressure washer.
Do not use scouring agents or all-purpose cleaners.
Do not use steam cleaners.
Do not use bleach-based wipes.
Cleaning the housing and control panel
Wipe the housing and fascia with a soft cloth and soapy
water only.
Wipe the drum, door seal and inside of the door with a
damp cloth only.
NOTICE: Do not clean with a water jet.
Remove detergent and cleaning agent residue
immediately.
During drying, water may occasionally accumulate
between the window and the seal. This does not affect
the proper operation of your dryer.
Cleaning the lint filter area
Over time, lint from the drying process collects in the lint
filter area.
This lint can be easily removed using a vacuum cleaner.
38
Cleaning the lint filter
A dirty filter extends the drying time and increases
energy consumption.
The filter should be cleaned before or after each drying
process.
If
é
indicator lights up during a drying program, clean
the filter immediately.
Tip: The program interrupts automatically.
To clean the lint filter:
Press the center of the Program Selector to switch off
1.
the appliance.
CAUTION
9
The inside of the door heats up during the drying
process. The drum, the door and the laundry may
be hot.
Open the door.
2.
Pull out filter.
3.
Remove the fluff from the fluff filter recess. Ensure that
no fluff falls into the open shaft.
Advertisement
Table of Contents
