Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch WTG86400KE
Summary of Contents for Bosch WTG86400KE
- Page 1 Tumble dryer WTG86400KE [en] User manual and installation instructions...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety ........... 4 9 Programmes ...... 24 1.1 General information.... 4 9.1 Automatic programmes... 24 1.2 Intended use...... 4 9.2 Timed programmes .... 25 1.3 Restriction on user group.. 4 10 Accessories...... 27 1.4 Safe installation ...... - Page 3 16 Troubleshooting...... 37 17 Transportation, storage and disposal ........ 41 17.1 Preparing the appliance for transportation ...... 41 17.2 Disposing of old appliance ... 41 18 Customer Service.... 42 18.1 Product number (E-Nr.) and production number (FD).. 42 19 Consumption values.... 43 20 Technical data ...... 44...
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶... - Page 6 en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶...
-
Page 7: Safe Use
Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. ▶ Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. - Page 8 en Safety WARNING ‒ Risk of explosion! If there is coal dust or flour in the air around the appliance, this may cause an explosion. ▶ Keep the area around the appliance clean during operation. WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff.
-
Page 9: Safe Cleaning And Maintenance
Safety en ▶ If drying is interrupted early, remove the laundry immediately and spread it out. CAUTION ‒ Risk of injury! The covering plate may break if you stand on or climb onto the appliance. ▶ Do not stand on or climb onto the appliance. The appliance may tip over if you sit on or lean against the open door. - Page 10 en Safety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use the manufacturer's original spare parts and original ac- cessories. WARNING ‒ Risk of poisoning! Poisonous fumes may be given off if you use cleaning agents that contain solvents.
-
Page 11: Preventing Material Damage
Preventing material damage en Clean the appliance with nothing ▶ 2 Preventing material but water and a soft, damp cloth. Remove all detergent residue, damage ▶ spray residue or other residues im- mediately if they come into contact ATTENTION! with the appliance. The functionality of the appliance may be impaired if you use the wrong quantity of fabric softener, de-... -
Page 12: Energy Saving Mode
en Installation and connection Check the appliance for visible After drying, clean the fluff filter damage. → Page 29. Open the door. a If the fluff filter is dirty, this reduces Remove any accessories from the the air flow in the appliance, ex- drum. -
Page 13: Requirements For The Install- Ation Location
Installation and connection en 4.3 Requirements for the in- Installation loca- Requirements tion stallation location In a washer-dryer Only use the ori- ATTENTION! stack ginal connection If the appliance is tilted at an angle set from the greater than 40°, residual water may dryer manufac- leak out of the appliance and cause turer when set-... - Page 14 en Installation and connection hose to drain away excess condens- Pull out the condensation hose ation directly into the waste water from the connecting piece. system. Notes ¡ Operate this appliance using the water drain hose provided. If you connect the water drain hose → Page 14, you do not have to regularly empty the condensation container → Page 30.
- Page 15 Installation and connection en Push the water drain hose as far Water outlet connection types as it will go into the connecting ATTENTION! piece. In the event of a blocked or covered outlet, accumulated wastewater can flow back into the appliance. Before operating the appliance, en- ▶...
-
Page 16: Aligning The Appliance
en Installation and connection Secure the elbow to the gully. 4.5 Aligning the appliance In order to reduce vibrations and noises, align the appliance correctly. To align the appliance, turn the ap- ▶ pliance feet. Check that the appli- ance is level using a spirit level. All appliance feet must stand firmly on the ground. -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Ventilation opening Door Maintenance flap on the base Condensation container... -
Page 18: Control Panel
en Familiarising yourself with your appliance 5.2 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 24 Programme selector → Page 27 Display → Page 19 Buttons → Page 21... -
Page 19: Display
Display en 6 Display The display shows the current settings, options or relevant information. Example: Display Display Designation Description 0:40 Programme dura- Expected programme duration or pro- tion/programme gramme time remaining in hours and time remaining minutes. 01:25 Timed programme The timed programme is set. → "Timed programmes", Page 25 ... -
Page 20: Dryness Level
en Display Display Designation Description Dryness level ad- The adjusted dryness level is activated. justed → "Dryness level", Page 23 Crease-reduction The crease-reduction function is activated. function Gentle drying Gentle drying is activated for delicate fab- rics. → "Buttons", Page 21 ... - Page 21 Buttons en 7 Buttons Below is an overview of the buttons and their setting options. Button Selection Description Start/Pause ¡ Start Start, cancel or pause the programme. ¡ Cancel ¡ Pause 3 sec. ¡ Activate Activate or deactivate the childproof lock. ¡...
- Page 22 en Buttons Button Selection Description Finished in Up to 24 hours Set the programme end time. The programme duration is already included in the set number of hours. Once the programme has started, the pro- gramme duration is dis- played. Time Dry ...
-
Page 23: Changing The Dryness Level
Dryness level en 8 Dryness level Each automatic programme has a specified dryness level. The dryness level defines how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result Cupboard Multi-layered, thick laundry The laundry is dry. Dry Plus that does not dry readily. -
Page 24: Programmes
en Programmes 9 Programmes You can dry your fabrics using either an automatic programme or a timed pro- gramme. 9.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors ¡ Select the dryness level according measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle. -
Page 25: Timed Programmes
Programmes en Programme Description Max. load (kg) AllergyPlus Dry hard-wearing, heat-resistant fabrics made of cotton or linen. Note: Particularly suitable for strict hy- giene requirements. Sportswear Dry self-drying sportswear made of per- formance fibres, microfibres and synthet- ics. Shirts 15' ... - Page 26 en Programmes Programme Description Max. load (kg) Timed program Dry all types of fabric except for wool and warm silk. Suitable for pre-dried or slightly damp laundry and for drying off multi-layered, thick laundry.
-
Page 27: Accessories
Accessories en 10 Accessories Use original accessories. These have been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 42. Order number Connection kit To save space, stack the WTZ2041X appliance on a suitable washing machine of the same width and depth and that is from the... -
Page 28: Loading Laundry
en operation If required, adjust the programme Press Finished in until the dis- settings. play shows the required pro- gramme end time. 12.3 Loading laundry Press Start/Pause . The changed programme end time Note: To prevent creasing, note the is activated. maximum load for the programmes. -
Page 29: Fluff Filter
operation en Remove the fluff from the recess. 12.10 Fluff filter During drying, fluff from the laundry is collected in the fluff filter. The fluff fil- ter protects the appliance from fluff. Cleaning the fluff filter If the drying programme has finished or the display shows a notification while the appliance is in operation, clean the fluff filter. -
Page 30: Condensation Container
en operation Clean the fluff filter thoroughly un- 12.11 Condensation con- der warm, running water and then tainer dry it off. Condensation forms during drying, which your appliance uses for auto- matic cleaning. By default, the con- densation is collected in the appli- ance's condensation container. -
Page 31: Childproof Lock
Childproof lock en Empty the condensation container. a The display shows . a The control elements are locked. a The childproof lock remains active even after the appliance has been switched off and in the event of a power cut. 13.2 Deactivating the child- proof lock Requirement: To deactivate the... -
Page 32: Basic Settings
en Basic settings 14 Basic settings You can configure the basic settings for your appliance to meet your needs. 14.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme. -
Page 33: Changing The Basic Set- Tings
Cleaning and servicing en 14.2 Changing the basic set- nothing but water and a damp tings cloth. Set the programme selector to po- Remove all de- Fresh deposits sition 1. tergent residue, are easier to re- spray residue or move without other residues leaving any immediately. - Page 34 en Cleaning and servicing Open the lever for the heat ex- Clean the heat exchanger cover changer cover. under running water and dry it. Make sure that you remove all dirt Pull out the heat exchanger cover from the seal. by the handle. Pull out the heat exchanger hori- zontally.
-
Page 35: Moisture Sensor
Cleaning and servicing en Clean the opening with a soft, Insert the heat exchanger cover by damp cloth. the handle. Slide the heat exchanger in hori- Close the lever for the heat ex- zontally as far as it will go. changer. Ensure that the heat exchanger is Close the maintenance flap. - Page 36 en Cleaning and servicing ance changes the duration of the Note: If you do not clean the appli- automatic programme depending on ance as described, the appliance's the residual moisture in the laundry. functionality may be impaired. Open the door. Cleaning the moisture sensor Clean the moisture sensor with a Over time, residue from limescale, sponge.
-
Page 37: Troubleshooting
Troubleshooting en 16 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 38 en Troubleshooting Fault Cause and troubleshooting Creasing. → "Changing the dryness level", Page 23. ▶ → "Adjusting the dryness level", Page 23. ▶ Anti-Crease not activated. Activate the Anti-Crease function. ▶ → "Buttons", Page 21 and programme Condensation tank filled. terminated. → "Emptying the condensation container", Page 30. → "Inserting the condensation container", Page 31. → "Starting the programme", Page 28.
- Page 39 Troubleshooting en Fault Cause and troubleshooting The length of the pro- The programme operation is optimised electronically. gramme changes dur- This may change the programme duration. ing the drying cycle. Not a fault – no action required. ▶ Pumping noise. Condensation pump active. Not a fault –...
- Page 40 en Troubleshooting Fault Cause and troubleshooting The laundry is too The load is too large. damp. Observe the maximum load capacity of the ▶ → "Programmes", Page 24. After the end of the programme, warm laundry feels damper than it actually is. Remove the laundry from the drum as soon as the drying programme has finished.
-
Page 41: Transportation, Storage And Disposal
Transportation, storage and disposal en 17.2 Disposing of old appli- 17 Transportation, stor- ance age and disposal Valuable raw materials can be re- used by recycling. 17.1 Preparing the appliance for transportation WARNING Risk of harm to health! Tip: The appliance may contain re- Children can lock themselves in the sidual water, which may drip out of it appliance, thereby putting their lives when transported. -
Page 42: Customer Service
en Customer Service 18 Customer Service Detailed information on the warranty period and terms of warranty in your country is available from our after- sales service, your retailer or on our website. If you contact Customer Service, you will require the product number (E- Nr.) and the production number (FD) of your appliance. -
Page 43: Consumption Values
Consumption values en 19 Consumption values The programme The actual values may deviate from Cottons Cupboard Dry the indicated values depending on (denoted by the arrow symbol) is the type of fabric, composition of suitable for drying cotton laundry with laundry to be dried, residual moisture a normal dampness level, and is the in the fabric, set degree of dryness,... -
Page 44: Technical Data
en Technical data Programme Final Load Spin Initial Pro- Energy mois- (kg) speed mois- gramm con- ture (rpm) ture e dura- sump- level level tion tion (h:min) (kWh/ cycle) Cottons Iron 12.0 1000 1:05 2.12 Cottons ... - Page 48 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.