Table of Contents
Advertisement
Home Connect
This appliance is Wi-Fi enabled and can be controlled
remotely via a smartphone or tablet PC.
With the Home Connect app, you can use your
smartphone or tablet PC to do the following on this
appliance:
Select and start programs.
▯
Change program settings.
▯
Query program status.
▯
Change appliance settings.
▯
Switch off appliance.
▯
Before you can use the Home Connect functions, you will
need to install the Home Connect app on your
smartphone or tablet PC, register, connect your
appliance once automatically or manually to your home
network, and then connect your mobile device to your
appliance via the Home Connect app.
You can find information about the app on our
Home Connect website www.home-connect.com.
The availability of the Home Connect function depends
on the availability of Home Connect services in your
country. Home Connect services are not available in
every country.You can find more information here
www.home-connect.com.
Notes
Observe and comply with all safety instructions in
▯
manuals and apps when operating appliances via the
app while you are away from them. You must also
follow the instructions in the Home Connect app.
You cannot use the Home Connect app to change
▯
programs or options while the appliance is operating.
However, you can see any changes made at the
appliance via the app display.
Connecting to your home network
automatically
If your router has a WPS function, you can connect the
appliance to your home network automatically.
If your router does not have a WPS function, you will
need to connect the appliance to your home network
manually.
Switch the appliance on.
1.
Press and hold Remote Start for at least 3 seconds.
2.
'ž£
(connect automatically) will appear on the
display.
30
Press Start/Pause to connect to the network.
3.
flash on the display.
The appliance will now try to connect to your home
network.
Activate the WPS function on your home network
4.
router within the next 2 minutes.
If the appliance has connected to your home network
successfully,
(connected) will appear on the display
™©Ÿ
and
will be lit continuously.
|
Press Remote Start briefly to exit the Home Connect
5.
settings.
Note: If you are not able to establish a connection,
check whether your appliance is within range of your
home network. Try connecting automatically again or
connect your appliance manually.
Connecting to your home network
manually
If your appliance has already been automatically
connected to your home network, you can skip the
manual connection step.
If your router does not have a WPS function, you will
need to connect the appliance to your home network
manually.
Switch the appliance on.
1.
Press and hold Remote Start for at least 3 seconds.
2.
(connect automatically) will appear on the
'ž£
display.
Turn the program selector to position 2.
3.
(connect manually) will appear on the display.
†'˜
Press Start/Pause to connect to the network.
4.
flash on the display.
The appliance will now set up its own WiFi network with
the name (SSID) Home Connect. You can access it on
your smartphone or tablet PC.
will
|
will
|
Advertisement
Table of Contents
