Gigabyte GA-7ZXE User Manual page 66

7ZXE Motherboard
IDE1 Conductor Cable
Auto Will be automatically detected by BIOS (Default Value)
ATA66/100 Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE
device and cable is compatible with ATA66/100)
ATA33 Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE
device and cable is compatible with ATA33).
IDE2 Conductor Cable
Auto Will be automatically detected by BIOS (Default Value)
ATA66/100 Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE
device and cable is compatible with ATA66/100)
ATA33 Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE
device and cable is compatible with ATA33).
OnBoard Serial Port A
Auto BIOS will automatically setup the port A address. (Default Value)
3F8/COM1 Enable onboard Serial port A and address to 3F8.
2F8/COM2 Enable onboard Serial port A and address to 2F8.
3E8/COM3 Enable onboard Serial port A and address to 3E8.
2E8/COM4 Enable onboard Serial port A and address to 2E8.
Disabled Disable onboard Serial port A.
OnBoard Serial Port B
Auto BIOS will automatically setup the port B address. (Default Value)
3F8/COM1 Enable onboard Serial port B and address to 3F8.
2F8/COM2 Enable onboard Serial port B and address to 2F8.
3E8/COM3 Enable onboard Serial port B and address to 3E8.
2E8/COM4 Enable onboard Serial port B and address to 2E8.
Disabled Disable onboard Serial port B.
Serial Port B Mode
Normal Normal operation. (Default Value)
IrDA Onboard I/O chip supports IRDA
ASK IR Onboard I/O chip supports ASK IR.
59