Gigabyte GA-7ZXE User Manual page 29

USB_ON: USB Device Wake up Selection
Please note: To use "USB Dev Wakeup from S3~S5" function, set BIOS setting
"USB Dev Wake up from S3~S5" to ENABLED and enable jumpers "STR_EN"
& "USB_ON".
*(Power on the computer and as soon as memory counting starts, press <Del>.
You will enter BIOS Setup. Select the item "POWER MANAGEMENT SETUP",
then select "USB Dev Wake up from S3~S5". Remember to save the setting by
pressing "ESC" and choose the "SAVE & EXIT SETUP" option.)
STR_EN: STR Enable
Panel and Jumper Definition
1
1
Enable
Normal
(Default)
Pin No. Definition
USB Device
1-2 close
Wakeup Enabled
2-3 close Normal (Default)
1
1
Enable Disable
(Default)
Pin No. Definition
1-2 Close STR Enable
2-3 Close STR Disable(Default)
22