Gigabyte GA-7ZXE User Manual page 26

7ZXE Motherboard
IR: IR
Please note:
Be careful with the polarity of the IR connector while you connect the IR.
Please contact you nearest dealer for optional IR device
STR_LED: STR LED Connector & DIMM LED
Please note:
Do not remove memory modules while DIMM LED is on. It might cause
short or other unexpected damages due to the 3.3V stand by voltage.
Remove memory modules only when STR function is disabled by jumper
and AC Power cord is disconnected.
1
Pin No. Definition
1 VCC (+5V)
2 NC
3 IR Data Input
4 GND
5 IR Data Output
+
1
STR LED Connector External
19