Table of Contents
Advertisement
P
S
OWER
AVINGS
To save power consumption, when the scanning process is finished, the scanner
light source will turn itself off and the scanner will enter a lower-power mode without
delay time.
Information
The scanner will enter the standby mode after
it is idle for 10 minutes. Simply press any
scanner button on the scanner panel and the
scanner will be back to the normal status.
From the Windows START menu, point to All
Programs > Your Scanner Model Name, and
then click Scanner Utility. (For Windows 8.1
users: Point your mouse cursor to the upper or
lower right corner of your screen to open the
Charm bar. Click on the Start charm, then
click on the downwards arrow button in the
lower left corner of the screen. The Apps
screen will be shown. Move your cursor to the
right edge of the screen to scroll right until you
find Your scanner model name, and then
click on Scanner Utility.) Refer to the online
help of Scanner Utility to explore more about
standby mode.
26
Advertisement
Table of Contents
