Table of Contents
Advertisement
Attention
L
B
OADING
USINESS
Feed the business card, headfirst and face down, into the ADF or Card Slot at the
rear side of the scanner. Align the card to the reference mark
For single-sided scans, load the business card face down.
For double-sided scans, load the business card in desired order.
Attention
L
P
OADING
LASTIC
The plastic card can be embossed credit card, driver license, ID card, insurance
card, medical card or any membership card.
DO NOT load more than 20 sheets of paper
2
(70 g/m
, 18 lb.) to the ADF.
Paper scanned from the ADF must be a
minimum of 5.08 x 5.08 cm (2" x 2", W x L).
Make sure there are no gaps between the
document stack and the paper-width slider;
otherwise, the scanned images can be
skewed.
Although the documents should be loaded
firmly in place ensuring optimum scanning
accuracy, they should never be wedged in so
tightly that the process of feeding them
through the scanner is strained.
Do not load additional paper into the ADF
while the unit is feeding and scanning.
C
ARDS
Don't load more than 6 business cards in one
batch.
It is recommended that the business cards
you wish to scan are vertically loaded into the
ADF.
C
ARDS
15
.
Advertisement
Table of Contents
