Table of Contents
Advertisement
Warning functions
Warning beeping sound
- When operating correctly
- When operating incorrectly
- When the sewing machine is
It means that the thread is
twisted or jammed and the hand
wheel axle can't move.
Please look through the "Trouble
shooting guide" on page 69/ 70 to
find the solution.
After the problem has been
solved, the machine will continue
to sew.
Return bobbin winder spindle
to left
If you press any button on the
machine when the bobbin is full
or the bobbin winder spindle is
in the right position, then the
machine will beep 3 times as a
warning.
Return the bobbin winder
spindle to the left position.
If the problem is still not solved,
please contact your local dealer.
During the sewing, if the thread
get jammed inside the hook
stopping the needle from
moving and you continue
pressing the foot control, the
security switch will stop the
machine completely. In order to
restart the sewing machine, you
will have to turn the on/off
switch to the OFF position and
then ON again.
56
: 1 beep
: 3-short beeps
in trouble and can't sew
: 3-short beeps
Note:
Attention:
Advertisement
Table of Contents
