Table of Contents
Advertisement
01
02
03
0.0
2.0
3.5
0.5
1.0
2.0
06
07
08
T
0.0
1.0
3.0
0.5
1.0
2.0
04
05
T
5.0
7.0
3.0
4.5
08
5.0
7.0
3.0
4.5
32
Straight stitches and
needle position
Changing the needle position
These setting apply only to
patterns 01-05. The pre-set
position is "3.5", center position.
When you slide the stitch width
adjustment lever to the left, the
needle position will move to the
left. When you slide the stitch
width adjustment lever to the
right, the needle position will
move to the right.
Changing the stitch length
To shorten the stitch length,
slide the stitch length
adjustment lever to the left. For
a longer stitch length, slide the
stitch length adjustment lever to
the right.
Generally speaking, the thicker
the fabric, thread and needle,
the longer the stitch should be.
Zigzag stitches
Adjusting the stitch width
The maximum zigzag stitch
width for zigzag stitching is
"7.0"; however, the width can be
A
reduced on any patterns. The
width increases as you slide the
stitch width adjustment lever
from "0.0-7.0".
Adjusting the stitch length
The density of zigzag stitches
increase as the setting of stitch
length approaches "0.3".
Neat zigzag stitches are usually
achieved at "1.0-2.5".
Closed up zigzag stitches
(close together) are referred to
as a satin stitch.
Advertisement
Table of Contents
