Gigabyte 8S651M-RZ User Manual page 27

Onboard LAN Device
Enabled
Disabled
System Share Memory Size
4MB/8MB/16MB/32MB/64MB
USB Controller
Enabled
Disabled
USB Legacy Support
Enabled
Disabled
Init Display First
AGP Set Init Display First to AGP. (Default value)
PCI Set Init Display First to PCI.
Onboard Serial Port A
Auto BIOS will automatically setup the port A address.
3F8/IRQ4 Enable onboard Serial port A and address is 3F8. (Default value)
2F8/IRQ3 Enable onboard Serial port A and address is 2F8.
3E8/IRQ4 Enable onboard Serial port A and address is 3E8.
2E8/IRQ3 Enable onboard Serial port A and address is 2E8.
Disabled Disable onboard Serial port A.
Onboard Serial Port B
Auto BIOS will automatically setup the port B address.
3F8/IRQ4 Enable onboard Serial port B and address is 3F8.
2F8/IRQ3 Enable onboard Serial port B and address is 2F8. (Default value)
3E8/IRQ4 Enable onboard Serial port B and address is 3E8.
2E8/IRQ3 Enable onboard Serial port B and address is 2E8.
Disabled Disable onboard Serial port B.
Serial Port B Mode
(This item allows you to determ ine which Infra Red(IR) function of Onboard I/O chip)
ASKIR Set onboard I/O chip UART to ASKIR Mode.
IrDA Set onboard I/O chip UART to IrDA M ode.
Normal Set onboard I/O chip UART to Normal Mode. (Default Value)
Onboard Parallel port
378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default Value)
278/IRQ5 Enable onboard LPT port and address is 278/IRQ5.
Disabled Disable onboard LPT port.
3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7.
"*" For 8S651M-RZ only.
(*)
Enable onboard LAN device. (Default value)
Disable onboard LAN device.
Set onchip VGA shared memory size.(Default Value:32MB)
Enable USB Controller. (Default value)
Disable USB Controller.
Enable USB Legacy Support.
Disable USB Legacy Support. (Default value)
- 27 - BIOS Setup