Step 4-2: Connectors Introduction - Gigabyte 8S648FX-RZ User Manual

MIC In jack
Microphone can be connect to MIC In jack.
After installation of the audio driver, you are able to use 2/4/6-channel audio feature by software
selection. You can connect "Front speaker" to "Line Out" jack, Connect "Rear speaker" to
"Line In" jack and connect "Center/Subwoofer" to "MIC In" jack.
LAN port *
LAN is fast Ethernet with 10/100Mbps speed.
USB port
Before you connect your device(s) into USB connector(s), please make sure your device(s)
such as USB keyboard, mouse, scanner, zip, speaker...etc. Have a standard USB interface.
Also make sure your OS supports USB controller. If your OS does not support USB controller,
please contact OS vendor for possible patch or driver upgrade. For more information please
contact your OS or device(s) vendors.

Step 4-2: Connectors Introduction

1) ATX_12V
2) ATX
3) CPU_FAN
4) SYS_FAN
5) IDE1 / IDE2
6) FDD
7) PWR_LED
8) F_PANEL
"*" Only for 8S648FX-RZ.
8S648FX-RZ Series Motherboard
1
9
11
10
12
13
4
- 12 -
3
2
5
15
16
6
8
7
14
9) F_AUDIO
10) SUR_CEN
11) CD_IN
12) AUX_IN
13) SPDIF_IO
14) F_USB1 / F_USB2
15) CLR_CMOS
16) BAT