Setup - Sagitter SG IPLEDBAR18 User Manual

5.1 – MENU
5.1.1 - Built-in program mode (Pr.XX)
Pr.01 Static color
Pr.02 Four color fading IN / OUT
Pr.03 Multicolor fading IN / OUT
Pr.04 Multi color dream
Pr.05 Four color change
Pr.06 Multicolor change
Pr.07 Red fading
Pr.08 Green fading
Pr.09 Blue fading
Pr.10 White fading
1) Pr.01 allows to select the pre-programmed colors as following table.
0 Off
1 Red
2 Red + Green (Yellow)
3 Red + Green + White
4 Green
5 Green + Blue
6 Blue
7 Red + Blue (type 1)
8 Red + Blue (type 2)
9 White
10 Red + White
11 Green + White
12 Blue + White
13 Red + Green (Amber)
15 Cold White
15 Warm White
When the display shows Pr.01, press SETUP button to enter in the STATIC COLOR MENU.
Use UP/DOWN buttons to select the preferred color. Press again SETUP button to enter
in the STROBE menu and select the flash frequency (FS.00 - FS.99) with the UP/DOWN
buttons.
2) When the display shows the values between Pr.02 to Pr.10, it is possible
to select one of the internal programs. It is possible also to adjust the
speed (SP.00 - SP.FL) and the flash frequency (FS.00 - FS.99)

5. - SETUP

20