ONE POINT REPAIR GUIDE
3. NO BOOTING WHEN YOU TURN THE UNIT ON, NO MESSAGE OR
"HELLO" ON FRONT PANEL
When you turn on your set, it will blank / no message or hello front panel, and it will not boot-
up.
3-1. IC203 (No 3.3 VA)
3-1-1. Solution
Replace IC203 on main board.
3-1-2. How to troubleshoot (Countermeasure)
1) Please check 5.1 VA of IC203 pin2 (VIN).
2) If 5.1 VA is abnormal, follow the stage 2-1 case1 at the previous page.
3) If 5.1 VA is OK, but 3.3 VA is abnormal at the IC203 pin1(VOUT), replace IC203.
3-1-3. Service hint (Any picture / Remark)
< Main board bottom view >
3-31